Operation Manual

ENGLISH

Hint: The ‘Network Name’ enables you to access your Powerline Mini home network.

Do not share this name with other people! If you wish, you can write down the

‘Network Name’ in the manual and keep the manual in a secure place.

3.3 Add a new unsecured Powerline Mini to your already

secured network

If you have a secured Powerline Mini home network, and you wish to connect a new

Powerline Mini adapter which is not secured yet, you will need to set the so-called

‘Network Name’ on this new adapter to add this new powerline adapter to your already

secured network.

The new Powerline Mini is directly connected to a computer.

1. If you are using a new computer, you need to install the software first. Double click

the ‘PLC Utility’ icon on your desktop to open the software.

2. Click the ‘Main’ tab.

3. Enter the secret network name in the ‘Network Name’ field.

4. Click ‘Set Local Device’.

5. The ‘PLC Utility’ will indicate the network name has been set.

6. Click ‘OK’.

7. You can now check whether a connection with the other adapters in the Powerline

Mini home network has been established:

 Click the ‘Main’ tab.

 All Powerline Mini adapters in your home network should now be visible and

will be connected.

8. Your new Powerline Mini has now been added to your Powerline Mini network,

and is secured.

4.0 Reset the powerline adapter

To reset the powerline adapter to factory defaults, please follow these steps :

1. Press the ‘NID/RST’ button.

2. Keep the button pressed for 10 to 15 seconds.

3. Release the button.

4. All LED indicators with switch Off and the powerline adapter will reboot.