Operation Manual

3
|
ENGLISH
2.0 Connecting the Powerline Adapters
Note: For the best performance, connect the powerline adapters directly to the mains.
Don’t connect them to an extension cable or a power strip.
Note: Please make sure the ON/OFF switch on the right side of the adapter is in the
upper position, so the EM8036 is switched ON.
If you want to share the current internet connection with other computers, or if you
want to create your own network, you need to connect another
powerline adapter to a
free LAN port of your (modem)router. Use the following steps to connect a powerline
adapter to your (modem)router:
1. Take the powerline adapter out of the packing.
2. Connect the supplied network cable to a free LAN connection of your
(modem)router.
3. Connect the supplied network cable to the LAN connection of the powerline
adapter.
4. Connect the powerline adapter to a wall outlet.
Before you continue with the next steps, please write down the password of your WiFi
powerline adapter. You can find this password on the bottom label at “WiFi PWD”.
My WiFi password is :……………….
Now the other
powerline adapter is connected to your (modem)router, you can
connect the WiFi powerline adapter to a wall outlet. The WiFi powerline adapter will
automatically connect to the
other powerline adapter.
To make a wireless connection with the WiFi powerline adapter, please select the
“Eminent_Wifi” wireless network. You will be asked to enter a password. Please fill out
the password you have wrote down above.
Note: You can connect a maximum of 16 Powerline adapters in your network.