Operation Manual

ENGLISH

2.1 Connect by WPS

Please follow the steps below to connect your device to the WiFi powerline adapter by

WPS:

1. Press the WPS button on your device (please check you devices user manual)

2. Press the WPS button of the WiFi powerline adapter for about 1 second

3. Both devices will start to setup the connection. This will take about 1 minute.

3.0 Using the software

As soon as the powerline devices haven been connected correctly, a network

connection will be established automatically. It is possible to secure the powerline

network. In order to secure the network, the powerline software needs to be installed.

3.1 Installing the software

1. Take the supplied CD-ROM out of the packing.

2. Insert the CD-ROM in your computer’s CD-ROM or DVD-player.

3. The CD-ROM will start automatically.

4. Follow the steps on your screen to install the software.

3.2 Securing your network using the software

After installing the software, an icon on your desktop has been added. This icon is

named ‘PLC Utility’.

Double-click this icon to open the powerline software. When the software has been

opened, the screen is divided in two parts: The upper part shows information about

the powerline adapter which is connected directly to this computer (local MAC). The

lower part shows information about other powerline adapters which are present in the

same network and have the (default) name ‘Remote’.

Note: If you want to secure powerline adapters which are not directly connected to

your computer, you need to use the so called ‘Password’ or ‘Device ID key’ which is

present on the sticker at the bottom of the powerline adapter. You do not have to use

this key to secure the adapter which is directly connected to your computer.

Use the following steps the secure the powerline adapters:

1. In the bottom field of the ‘PLC Utility’ you can choose a Powerline adapter from

the list, where no value is set in the ‘Password’ column.

2. Click ‘Enter Password’.

3. Fill out the ‘Password’ or ‘Device ID’, and click ‘OK’. The ‘Password’ or ‘Device

ID’ can be found on the sticker of the Powerline. An example of this key is ‘XK8Y-

GH36-BR1K-LSZA’.