Operation Manual

18
|
ENGLISH
4.11 Text message commands
All settings of the system can be controlled and configured by sending text
messages to the system. Before you power up the alarm system install a mobile SIM
card first. Notice: make sure the PIN and voicemail of the SIM card are both
disabled. You can disable this by using the SIM card in a regular mobile phone. In
case of a Prepaid card make sure you have enough credit on the SIM card. Install
the SIM card in the alarm system. Now you can power up the alarm system wait a
few seconds for the system connect to the mobile network. You can view all the
menu settings of the alarm system by sending a text message to the alarm system.
The first part of the menu will be send to you by a text message if u send a text
message with the text ? to the SIM card of the alarm system. The second part is
send by sending ?? and part 3 by sending ???.
You will receive the following text message :
You will receive the following text message:
?
‘0’ Disarm
‘1’ Arm
‘2' Home mode
‘3’ Two-way talk
‘4’ Call-back voice memo
‘00’ Settings inquiry
‘??’ Store phone and SMS No.
??
'5’ Store alarm phone No.
'6’ Store alarm SMS No.
'7' Store SMS No. For RFID tags
'8’ Store speed dial phone No.
'???' System setup