Operation Manual

35
|
ENGLISH
6.11 Configure the delay time
When a delay time is set, the alarm system will beep every second as warning of the
delay. The last 15 seconds the speed of the beeps will increase.
The delay you can set here, is the entry delay and exit delay time.
Remark: please check chapter “Set single zone delay time”, to set the entry delay
time of a sensor.
Copy above text into a new text message, modify the text and send the text message
to the GSM-number of the alarm system:
With the Eminent e-Alarm APP :
11
Entry and exit delay time (0-300 sec):
0
Entry and exit delay time (0-300 sec):
30
Set delay time successfully.