Operation Manual

40
|
ENGLISH
6.17 Delete all wireless remote controls by text message
All remote controls can be deleted from the system by sending a text message.
Use the text message as described below :
6.18 Restore factory defaults.
Also called hard reset. This needs to be done when, for example, a new SIM card is
installed.
Only programmed phone numbers can restore to factory defaults. Hard reset can
also be done by pressing the anti-sabotage button on the rear 5 times within 3
seconds.
6.19 Arm or Disarm the alarm system for free
To arm the system, call the number of the alarm system. Disconnect when it’s ringing.
The system will call you back. Do not pick up the phone but disconnect the
connection. The alarm is armed.
To disarm the system, call the number of the alarm system and wait for the system to
terminate the connection. The alarm is deactivated.
Remark : This function will only work when the voicemail of the SIM card is disabled!
0000
System has been restored to factory settings.
23
Delete remote controls successfully.