Operation Manual

6 | ENGLISH
Note : When an entry delay is set, the external control panel will NOT warn you with
an audio signal when a sensor is triggered. Only the alarm system itself will give an
audio signal !
3.2 Disarm the alarm system
Users can disarm the alarm system by using the control panel or by using RFID tags.
3.2.1 Using control panel to disarm
Input user code or admin code, and press the [Disarm] key. The LED indicator
flashes once and the control panel beeps once, and sends Disarm command to the
alarm system.
When the alarm panel receives the signal, the siren will beep twice and the Disarm
indicator will light. The alarm system enters disarmed state. In this state the sensors
being triggered will not cause an alarm.