Operation Manual

4 | ENGLISH
4.1 Add accessories
When the repeater is in learning mode, press the learning button once and trigger the
accessory you would like to connect (please refer to the manual of the accessory).
The Blue LED indicator will be lit for about 2 seconds. The repeater has added the
accessory successfully.
If you would like to add another accessory, please repeat the steps above.
Note: if the repeater does not receive a signal from the accessory within one minute, it
will exit the learning mode automatically.
4.2 Delete accessories
When the repeater is in learning mode, press and hold the learning button for 5
seconds. The Blue LED indicator will be lit for about 2 seconds. The repeater has
deleted all paired accessories successfully.
5.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.
6.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support.
You can also contact us by phone. Please check www.eminent-online.com/support for
the helpdesk phone number and opening hours.