EM8655 PIR and Microwave Outdoor Motion Detector
| ENGLISH EM8655 - PIR and Microwave Outdoor Motion Detector 1.0 Introduction ........................................................................................................... 2 2.0 Front of motion detector......................................................................................... 2 3.0 Inside the motion detector ..................................................................................... 3 3.1 Group settings (jumpers) .....................................................
| ENGLISH Green & Yellow & Red flashing : sensor is in self-test mode this will take about 60 seconds. When self-test has finished all three LEDs will switch off. * You can switch off the LED indicators by setting the LED jumper inside of the EM8655 to the off position. 3.0 Inside the motion detector Remove the back cover of the motion detector by unlocking it. 1. Microwave module 2. Green LED 3. Red LED 4. Yellow LED 5. Infrared sensor (PIR) 6. JP1 sensitivity jumper 7. JP2 not used 8. LED jumper 9.
| ENGLISH Remark: If the group of a sensor needs to be changed, all sensors need to be paired with the alarm system once more. It is not possible to remove one single sensor from a group ! (See chapter “Delete all wireless sensors by text message”) Home-group Normal-group Single-group 24-hours-group Remark : It’s recommended to install detectors that needs to be operational 24-hours, for example smoke detectors, in the 24-hours-group. 3.
| ENGLISH When the jumper is set to 2&3, the sensors sensitivity is set to normal, supplying maximal anti-interference capability. The EM8655 is set to 1&2 at default. 4.0 Installation tips Avoid installation of the motion detector in range of a window, air-conditioning, radiator, refrigerator, oven, direct sunlight or other places with high temperature fluctuation.
| ENGLISH 5.0 Test the motion detector After you fully installed the motion detector and the self-test is completed you can test the motion detector by walking within the range of the motion detector from one side to the other side. The LED indicator of the motion detector will flash if motion is detected. Adjust the motion sensor to get the best results. And repeat the test. 6.
| ENGLISH Country Belgium (Dutch) Belgium (French) Denmark Finland Germany Italy Norway Spain Sweden The Netherlands UK Hungary Hungary Hungary Phone number 070 277 286 070 277 286 +45 69918565 +35 8942415826 +49 (0)30 887 89 298 +39 0240042016 +47 21075033 807 080 042 +46 840 309985 0900-3646368 +44 (0)203 318 9998 1-4088902 (From Budapest) 06-1-4088902 (From the rest of Hungary) +36 1-4088902 (International) Rate per minute* €0.30 €0.30 Local Costs Local Costs Local Costs Local Costs Local Costs €0.
| ENGLISH If you are experiencing any problems with the printed manual or you can not find what you are looking for, please always check our website www.eminent-online.com first for the newest updated manual. Also, you will find frequently asked questions in the FAQ section. It is highly recommended to consult the FAQ section. Very often the answer to your questions will be found here. 9.
