manual

17 | ENGLISH
1. Connect you USB hard disk to the USB port of the EM7075.
2. Make sure you media player is connected to your network and that your
computer is started.
3. Turn on the media player by plugging in the media player’s power cable. During
booting the EM7075, the file on the USB hard disk will be read automatically.
4. Search on your Newsgroup for NZB files and download these to your hard disk.
5. Using your computer, open the login page of the NZB module. It looks like the
following: http://192.168.1.125 .The NZBget Web interface appears on your
screen.
6. Click ‘Browse’.
7. Browse to the NZB file you have downloaded from your Newsgroup and select it.
This file will be recognized as a .NZB file.
8. Click ‘Upload File’.
9. It could take a minute, however, on the right side of the screen the name of your
download will appear. Refresh your screen if necessary.
10. You can also view the status of your download on the right side of the screen.
11. The downloaded file will automatically be unpacked.
12. The moment unpacking has finished, you can playback this file.
13. Use the arrow keys to navigate to the ‘Video’ icon (if you have downloaded a
video file).
14. Below the ‘Video’ icon you will see the notification ‘USB1’. This means the media
player has recognized the connected device. If you see a blue border around one
of these notifications, it means that the media player has selected this device as
playback device.
15. Press the ‘OK’ key on the remote control. The available video files will be
displayed.
16. Select the video file you have just downloaded and press the ‘OK’ button on the
remote control.
17. The playback of the file will start.
9.4 Downloading using the Transmission module
1. Make sure you computer is started.