Specifications

A complete technical description of the LFT-8b is included in this
manual and begins on page 10. It is recommended that you become
familiar with this information because an understanding of the LFT
principals will assist you in the proper set up of these loudspeakers.
The LFT-8b is shipped in 3 boxes. The larger square box contains the two
woofer cabinets. The 2 long rectangular boxes contain the panels and grills. To
remove the panels position the box on its side and open the end of the shipping
carton. Remove the padding from the bottom and slide the speaker from the box
as shown below.
Open
After removing the speaker from its carton it can be leaned against a wall
standing up or placed with the front face of the speaker flat on the carpet. Then
the bubble wrap should be removed. The wrap also holds the grill cloth (covered
by a large cardboard sheet) to the speaker. After the wrap is removed these will
separate from the speaker.
Do not attempt to remove or loosen hardware on the drivers themselves.
The magnets are held together under great force and personal injury could
result.
Installation of
the LFT-8b
Unpacking the
Speakers
5