Specifications
Assemble the panel to each woofer cabinet as shown below.
Fasten the feet to the bottom of the woofer cabinet. Use the
drawing below to identify the correct hardware locations. Grill
cloths snap into place with Velcro fasteners at each corner on the
front and back of the speaker. Bolt the woofer box to the panel as
illustrated below. Laying the speaker on its side may be helpful
in assembly.
(5) #8X3/4 Sheet Metal
Screws In Front Of Panel
10-32 x 3/4 Socket Head
Screw (4)(4) #8X3/4 Sheet Metal
Screws In Bottom
Woofer Cabinet
Front View Showing
Position of The Five 8X3/4
Sheet Metal Screws
Location Of Terminal Board
Sheet metal Screw (2)
Connections to Mid-Range and Tweeter Panels
After attaching the woofer cabinets to the panels, you must attach
the three leads that come out of the mid-range/tweeter panel to the
screw barrier terminals on top of the woofer cabinets. The small
black wire (18 ga.) that comes from the tweeter panel is secured
to on of the terminals marked High, Med or Low on top of the
woofer cabinet. The larger diameter wires (12 ga.) will be
attached to their respective terminals atop the woofer cabinet,
Black to Negative, White to Positive.
Speaker
Assembly
6