Datasheet

9
Technical specification:
Input frequency: 48-860 MHz.
Input level: 30-80 dBuV.
Attenuator: On/Off (approx -20 dB).
Input impedance: 75 Ohm, F-connector.
Short circuit protection: Automatic fuse on antenna-
input.
DVB-T type: DVB-T or DVB-T2
Measuring method:
in digital: Three bars showing:
- PRE-BER (Bit Error Rate
before demod. correction).
- POST-BER (Bit Error Rate
after demod. correction).
- C/N (Carrier/Noise).
- MER (Modulation Error
Rate).
in analog: One bar showing dBuV in
high resolution or six bars
showing strength of six
channels.
Spectrum display with
zoom-in function.
Pitch tone indication from
beeper.
Signal-level readout:
Digital: BER, C/N and MER values.
Analog: dBuV with maxhold-function.
Power out: 0V, 5V,12V and 24V.
Power supply/charger: 10 -15V DC (Centerpin+).
Display: Back-lighted 128x64 Pixels
LCD.
Power consumption: 500mA.
Battery: 8x AA rechargeable batteries
of 1200mA each.
Weight: 0.3 kg.
Dimensions: 185 x 115 x 50 mm.
Accessories: Power 12V DC, 1A
Rubber-case.
Car charger.
Emitor International AB
Ostmästargränd 12
120 40 Stockholm
Sweden
Phone: [phone]
Fax: [phone]
Web: www.emitor.se