Instructions

10
2.5 Panel Mounting
2.4 Installation onto the Rail
1
3
c
During installation onto the rail, care should be taken to avoid injury from
mechanical part of the system. These precautions for the safety of the person
who does the rai mounting.
The unit is designed for rail mounting.
1- Put into the unit upper side of the
rail properly.
2- Pull down the rail lock apparatus
via a screw driver.
3.-Push the unit from the underside
for mounting to the rail.
2.5 Removing from the Rail
c
1
2
3
1- Pull down the rail lock apparatus
via a screw driver.
2- Pull the unit from the underside to
seperate the rail lock apparatus from
the rail
3.- Pull up the unit to remove from the
rail.
2
Before starting to remove the unit from the rail, power off the unit and the
related system.