Instructions

15
3.5.2 PTC and NTC Connection
3.5.1 TC (Thermocouple) Connection
3.5 Temperature Sensor Input Connection
67
TC
ii
ii
Input resistance is greater than 10M W.
ii
Pay attention the cable colours of PTC probe while doing the PTC probe
connection.
ii
Connect the wires with the polarity as shown in the
figure left.
Always use compensation wire corresponding to the thermocouple used. If
present, the shield must be connected to a proper ground.
Input resistance is greater than 10M W.
PTC
67
WHITERED
NTC
67