Instructions

18
Decrement
Button
Note-1: If increment or decrement button is pressed for 5 seconds continuously, increment and
decrement number become 10, if increment or decrement button is pressed for 10 seconds
continuously, increment and decrement number become 100.
4. Front Panel Definition and Accessing to the Menus
When power is first applied to the temperature controller, software revision number is shown on
the displays.
4.1 Observation of Software Revision on the Displays
“ r” ÞRevision
Software
revision
Number
Operation Screen is shown
If there is an unexpected situation while opening the device, power off the
device and inform a qualified personnel.
c
Note-1
SV
P
ESM-1510
SET
°C
Temperature Controller
SV
P
ESM-1510
SET
°C
Temperature Controller
SV
P
ESM-1510
SET
°C
Temperature Controller
It is used to
increase the value
and access to the
parameter in
programming
mode.
Note-1
It is used to enter to
the SET value
changing mode,
programming mode
and used as OK
button.
Led indication of Output
is active (If blinks, Compressor
protection time is active)
Led indication of SET value
changing mode
Led indication of
Programming Mode is active
Displays Temperature
Value,Temperature Set
Value and Parameters