Manualshelf

Data Sheet

ManualsBrandsEmko ManualsAutomationBang-bang, P, PI, PD, PID Temperature controller Pt100, T, J, K, R, S -200 up to 17
1
100-240 Vac (-15%; +10%) 50/60 Hz
24Vac (-15%;+10%) 50/60 Hz or
24Vdc (-15%;+10%) 50/60 Hz
Supply Voltage
ESM-4435
Process Controllers
A
Universal Input: TC, RTD, dc Voltage/Current
Thermocouple (TC): L(DIN 43710), J, K, R, S, T, B, E
and N(IEC584.1) (ITS90), C(ITS90)
Thermoresistance (RTD): PT-100, (IEC 751) (ITS90)
Input
BC
20
1
2
4 Digits process (PV) and 4 Digits set (SV) display
Configurable ON/OFF, P, PI, PD, and PID control forms
Manual/Automatic mode selection for control outputs
Programmable heating, cooling and alarm functions for control outputs
ESM-4435
(48x48x87, 5 mm)
Universal Input Dual SET PID
ESM-4435
5
HI
Output-3
Current Output (0/4...20mA Vdc ; 0/2 to 10 Vdc)
Relay Output 5A @ 250Vac
01
04
FG
Output-2
Relay Output 5A @ 250Vac
01
Universal process input (TC, RTD, mVdc, Vdc, mAdc) Bumpless transfer
Auto-tune ve Self-tune PID
Relay Output 5A @ 250Vac
Output-1
E
1
Suplly Voltage
100-240Vac,
24Vac/Vdc
48Vdc
24Vdc
max.50mA
Sensor
Suplly
Universal
Process Input
Thermocouple
Thermoresistance
0...10Vdc
0/4...20mAdc
Output-1
Relay Output
5A@250Vac
Relay Output
5A@250Vac
Output-2
Relay Output
5A@250Vac
or
Output-3
Current Output
0/4...20mA
NO C NO C NO C NC
0 1
01
HIA 20
/
/
0 0 0 0
ESM-4435
OUT
PUT
X3
9
48Vdc (-15%;+10%)
Dual or multi point calibration for dc Voltage/Current input
Specifications
Technical Specification
Accuracy: ±0.25%of full scale for thermocouple, thermoresistance,
mV, V ±0.70% of full scale for mA input
Cold Junction Compensation: Automatically ± 0.1°C/1°C
Line Compensation: Maximum 10 Ohm
Sensor Break Protection: Upscale
Sampling Cycle: 3 samples per second
Input Filter: 0.0 to 900.0 seconds

Summary of content (1 pages)