Instructions

7.9 Adjustmentof AlarmSetValues
If standard output ( Output-3 ), Module-1 or Module-2 is configured as an alarm output, alarm set
values of these outputs are in “SEt LýSt” menu. User can access to “SEt LýSt” menu both from
operator and technician menus.
Enter
passwordwith
incrementand
decrement
buttons.
PressEnterbuttontoconfirm
password
PressEnterbuttonforaccessing
SEtLýStmenu
ProcessSetValue
Operation
Screen
PressEnterbuttontoconfirmthe
changedvalueandaccesstothe
followingparameter.
OperatorPassword
56
Operatorandtechnician can
changetheparameterwith
incrementanddecrementbuttons
SETLISTMenu
Processandalarmsetvalues
areinSEtLýStmenu.
Whenmenubuttonis
pressed,OperatorMenu
Enteringscreenisshown
Operator
Menu
Entering
Screen
OperatorPasswordEntering
screenisaccessedbypressing
SET button.
Whenscreenisshown,
operatorparameterscanbeseenby
pressingSET buttonwithout
enteringoperatorpassword.But
operatorcannotchangethe
parameters.PleaserefertoSection
8.2.8(Operatorand Technician
Passwords)
If Operator password is not 0,
operator password entering
screen is shown
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET