Instructions

33
=
=
i
Counting direction : P --> 0 (Downcounting)
=
When count value reaches the 0 Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
at the end of the Pulse time and Actual value is reset. If the Start input is
active, then counting starts from Set value. If output pulse time
is 0, then output position has not change until Manual Reset happens.
Actual counting value stops at 0 value. Counting process is not continue
under the 0 value.
When Manual Reset happens count value becomes SET value.
0
Set
Reset
Output
0
Set
Output
Start
Reset
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.