Datasheet

Model:
Chemical System: Nickel Metal Hydride Ni-MH
Type 1/2AAA
Flat Top
Nominal Voltage Standard
1,2 V
Nominal Capacity Low Rate - 0.1C 280
mAh
Weight
6 g
Capacity Charge Discharge Minimum
Low Rate - 0.1C
0.1C 0.2C 280 mAh
Hi
gh Rate - 1C
0.1C 1C 290 mAh
Charging Standard Quick* Fast*
Minimum Charge
30 mA (0.1C) 30 mA (0.1C) 30 mA (0.1C)
Time Required (hrs)
16 hrs 16 hrs 16 hrs
Maximum Charge
70 mA (0.2C) 170 mA (0.5C) 330 mA (1C)
Time Required (hrs)
< 8 hrs < 2.2 hrs < 66 min ( - Delta V)
Minimum Overcharge
33 mA (0.1C)
Maximum Overcharge
660 mA with cut-off control
Maximum Discharge Current Continuous
0,99 A
Momentary (1 second )
3,3 A
Internal Impedance Typical at 1000Hz
80 milliohms upon fully charged
Temperature Storage for < 1 Month (deg.C) Storage for < 1 Year (deg.C)
Minimum
-20 -10
Maximum
40 30
Discharge (deg.C) Charge (deg.C)
Minimum
-20 0
Maximum
50 45
Service Life Standard (IEC61951-2)
upto 500 cycles (for reference)
Designations IEC 61951-2
*
Quick and Fast charge require cut-off control circuitry to terminate charge or switch to trickle charge when cell reaches full charge
Remark: The information contained herein is presented only as a guide for the applications of our products
Data in this specification are subjected to change without notice and become contractual only
after written confirmation by Emmerich.
D 10,0 ± 0.5
C 4,7 ± 0.3
H 22,0 ± 0.5
H1 0,3 (REF)
Dimensions (mm)
Specification for Sealed Rechargeable Nickel Metal Hydride Battery
EMMERICH NIMH AKKU 1/2 AAA 280 MAH FT-1Z (255008)
H
H
1
D
C
Charge: 33mA x 16hrs at 20deg.C
Charge: 33mA x 16hrs at 20deg.C
165mA
(0.5C)
66mA
(0.2C)
33mA
(0.1C)
990mA
(3C)
660mA
(2C)
330mA
(1C)