PRODUCT SPECIFICATION LITHIUM/IRON DISULFIDE AAA BATTERY Type Designation: FR03/AAA Prepared by : Checked by : Approved by : Issued Date : 2016.08.
RECORD OF REVISION TYPE DESIGNATION: FR03/AAA REV. No. REASON 0 Initial Released CONTENTS DATE PREPARE 2016-08-04 Q.
1. Scope: 2. Law & Regulation Compliances: This product complies with EU’s battery directive (2013/56/EU). Packaging materials comply with EU’s directive on packaging materials and waste (94/62/EC) 3. General: 3.1 Type designation IEC ANSI Common FR10G445 24LF FR03, AAA 3.2 Chemical system: Li/FeS2 3.3 Nominal voltage: 1.5 V 3.4 Weight: Approximate 7.5 g 3.5 Dimension (mm) The dimensions shall be in accordance with the below figures both prior to and after service output test.
. Appearance The battery visually inspected by unaided eye 30cm away from battery. The battery shall be free from dents, scratch, rust and extruded internal compounds, such as sealing compounds and etc, and serious displacement of artwork. Appearance defects shall not be observed that may adversely affect actual use or performance of batteries. 5. Electrical Characteristics Unless otherwise stated, all measurements are to be performed at a Standard Environment of 23 ± 2°C 55 ± 20% RH.
6. Leakage Resistance 6.1 Overdischarge Test conditions:test battery(B1) shall be predischarged to 50 % depth of discharge. It shall then be connected in series with three undischarged additional single cell batteries(B2,B3,B4) of the same type. A resistive load R1(3.9Ω)connected in series with the assembly of batteries , R1 is 3.9 The test shall be continued for 24 h. Number of test samples:9 batteries Requirement:no explosion and no fire during this test. 6.
8. Expiry Date: 10 years at 21℃ 9. Expiry Date Marking: 9.1 Unless otherwise specified, each battery will carry a manufacturing date code followed by month and year of manufacturing for domestic and manufacturing date code followed by month and year of expiry for export. (Shelf life 10 years) 10. Packaging Requirements 10.1 The total of heavy metal lead, cadmium, mercury, and hexavalent chromium concentration shall not exceed 100 ppm in Packaging materials and printing inks.
2010-05-28
11. Component / Information of Ingredients Chemical Nature: Lithium/iron disulfide battery APPROXIMATE PERCENT OF MATERIALS CAS NO. TOTAL WEIGHT (%) FeS2 30 12068-85-8 (iron disulfide) Li 6.1 7439-93-2 (lithium) Organic 11.5 Electrolyte Fe(iron) 27.5 MATERIALS APPROXIMATE PERCENT OF TOTAL WEIGHT (%) CAS NO. PE 4.6 9002-88-4 5.2 7429-90-5 1.0 7440-02-0 1.4 7782-42-5 Al (aluminum) Ni (nickel) 7439-89-6 Carbon Chart 1. Discharge diagram O O 1.8 1.6 1.