User's Manual

intensity for fan . The default time is 15 minutes. You can use and to set time.
Press to turn on fan intensity @ low, it will show six blue light bars under fan in the LCD
screen.
Press to turn on fan intensity @ medium, it will show increase six green light bars under fan
in the LCD screen.
Press to turn on fan intensity t @ high, it will show increase another six red light bars under
fan in the LCD screen.
Heat
Low = 25% of power / temperature
Med = 50% of power / temperature
High = 100% of power / temperature
Fan
Low, Med, High – PWM% application
Low: 25%
Medium: 50%
High: 90%
Helpful Tips and Troubleshooting
Problem
Solution
The handset doesn’t work
1.Remove any obstacles between the remote and
the device. Make sure you’re aiming the remote at
the device’s sensor.
2. Make sure the battery is properly installed.
Replace the battery if necessary
The heating pat or the fan stop working
suddenly
1、Restart the remote.
2、Power off and disconnect with power supply,
restart and power on after 20 minutes.