User manual

3
Wireless Weather Station
The wireless weather station displays time, date, alarm clock with snooze, the weather forecast, the information about
the indoor and outdoor temperature, indoor humidity and the moon phase. Before you start using the product, please
read the user manual carefully.
Specication
• Radio controlled clock (DCF)
• Indoor/outdoor temperature: from 0°C to +50°C; from -30°C to +60°C
Temperature dierentiation: 0.1°C
• Wireless sensor: transmittion frequency 433 MHz
• Transmission distance: up to 30 m in an opened area
• Number of sensors: max. 3
• Relative humidity: 20 % – 90 %
Dierentiation: 1 %
Accuracy: ±5 %
• Power:
Main unit: 3× AAA batteries (not included)
Sensor: 2× AAA batteries (not included)
• Dimensions and weight:
Main unit: 139×100×52 mm; 187 g (without batteries)
Sensor: 64×84×25 mm; 55 g (without batteries)
Layout of icons and buttons:
Weather station
A – Icon of weather forecast
B – Icon of comfort
C – Indoor temperature and humidity
D – Number of the remote sensor
E – Outdoor temperature
F – DCF 77 Radio Signal reception Icon
G – Displays the time
H – Displays the date, day in a week
I – Icon of the moon phase
If the button is pressed If holding the button (3 seconds)
Set changing the time and date setting
setting the time, date, language,
calendar, time zone
Alarm
alarm switch o/switch on, change possible
during alarm clock setting
alarm clock setting
+ setting the time format 12/24 h
-/Wave changing between °C/°F capturing the DCF 77 signal
Ch displaying the values from sensors 1,2,3 searching the sensor
Remote sensor:
Front side:
LED
Rear side:
J – setting the channel number 1, 2, 3 for communication with the weather station
Putting into operation
1. Insert the batteries into the station (3× AAA) and then into the remote sensor (2× AA). When inserting the bat-
teries observe the right polarity of the batteries to avoid the weather station or sensor damage. Use the alkaline
batteries of the same kind only, do not use the rechargeable batteries.
2. Place the both units next to each other. The weather station captures the signal from the sensor within 3 minutes.
GB