Service Instructions
Page 9
BasX PT1 and BasX TA1
BasX PT1 and BasX TA1 Front Panel
1. Headphone Jack
Use this jack to connect a pair of high-quality headphones.
Note: The Main Outputs are muted when headphones are inserted.
Note: The intelligent level control on the PT1 and TA1 independently stores and remembers the
levels for your Main Outputs and your Headphones. When you unplug your headphones, your
speakers will return to their previous level, and when you reconnect your headphones, they will
return to their previous level.
2. Input Buttons
In normal operation, these buttons are used to select which Input to listen to. (They perform
dierent functions when you’re in the Setup Menu; see the Setup Menu section for details.)
3. Power / Standby Button
This button is used to toggle the PT1 and TA1 between Standby and On modes. When the unit is
fully O nothing on the front panel will be illuminated. When the unit is in Standby the Standby
LED will be lit amber. When the unit is On, the Standby LED will be dark, the VFD will be lit, and
small blue legends beside the Headphone Jack and Input Buttons will be illuminated.
Note: The PT1 and TA1will only operate when the AC Power Switch on the rear panel is On.
When the AC Power Switch is turned On, the Standby Indicator will light amber; at which point
pressing the Standby button will turn the unit On.
4. Volume Knob
In normal operation, this knob is used to control the Volume on the unit. (It performs slightly
dierent functions when you’re in the Setup Menu; see the Setup Menu section for details.)
5. Standby LED
When the unit is in Standby the Standby LED will be lit amber. When the unit is fully O, or when
the unit is On, the Standby LED will not be lit.
4 51 32