Specifications

Page 8
Quick Start
To get the most from your Emotiva airmotiv powered studio monitors, we strongly urge
you to read the entire manual. If you just can’t wait to hear how great your airmotiv
powered studio monitors sound, this section will cover the basics you need to get
started.
• Find a secure location for your airmotiv powered studio monitors.
• Verify that the airmotiv monitors you received use the correct operating voltage for
your location (the AC line voltage is marked on the rear panel of each monitor).
• Verify that the front panel Level control on each airmotiv is in the calibrated (fully
clockwise) position.
• Plug your airmotiv powered studio monitors into grounded AC electrical outlets. If
you use a different power cord or extension cord, use only a three-prong grounded
type.
• Connect a signal source to either the unbalanced (RCA) or balanced (XLR) input on
the rear panel of each airmotiv monitor. (We recommend using a signal source with
a variable output level, as this is much more convenient than having to adjust the
level on the speaker itself.)
• Turn on the Power switch on the rear panel of each airmotiv.
• Enjoy the music.
While you’re enjoying your airmotiv monitors, it would be a great time to read the rest
of the manual to learn more about them.