Home Theater System User Manual

Page 88
Page 89
Favorite Settings Log
You can use this section to log your favorite settings from various OSD menus and other preferences
controlled by the DMC-1. This will come in handy if the unit is ever powered down for transport or
in the event loss of power is unintentional.
Tone Settings
You can reference the TONE SETTINGS on page 53 of this
manual.
Main Zone Settings
You can reference the MAIN ZONE and
ZONE 2 SETTINGS on page 55 of this
manual.
Zone 2 Settings
You can reference the MAIN ZONE and
ZONE 2 SETTINGS on page 55 of this
manual.
Mode Settings
You can reference the MODE SETTINGS
for the signal processing and decoding
functions on page 52 of this manual.
Be sure to note any dierent settings
between Dolby Pro-Logic II and Dolby
Pro-Logic IIx modes where applicable.
TONE LEVEL (in dB)
BASS
TREBLE
MAIN ZONE SETTINGS SELECTION
POWER UP SOURCE
POWER UP VOL. MODE
POWER UP VOL. LEVEL
MAX. VOLUME LEVEL
ZONE 2 SETTINGS SELECTION
ZONE 2 SYSTEM
BALANCE
POWER UP SOURCE
POWER UP VOL. MODE
POWER UP VOL. LEVEL
MAX. VOLUME LEVEL
MODE SETTINGS SELECTION
DYNAMIC RANGE
PL-II MODE
PL-II CENTER WIDTH II IIx
PL-II PANORAMA II IIx
PL-II DIMENSION II IIx
DTS LFE
DTS NEO:6
JAZZ CLUB AMBIENCE