Specifications
The power cable for the ERC-3 should be unplugged from the outlet during severe electrical storms, or when
unused for a long period of time.
Only replace the fuse(s) in the ERC-3 with a fuse(s) of proper value and voltage rating.
The ERC-3 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the ERC-3
and NEVER spray liquids into the vents or CD Loader mechanism. Care should be taken so that small objects
do not fall into the inside of the ERC-3.
You should seek service for your ERC-3 by qualiī€¯ed service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents or CD Loader mechanism.
3. The ERC-3 has been exposed to rain.
4. The ERC-3 exhibits a marked change in performance.
5. The ERC-3 has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE ERC-3 FROM THE AC POWER MAINS, DISCONNECT THE
AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE ERC-3 AC POWER CORD MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
WARNING: THE ERC-3 IS A CLASS 1 LASER PRODUCT. REMOVAL OF PROTECTIVE COVERS, UNATHORIZED
REPAIRS OR MODIFICATIONS, OR OPERATION NOT IN ACCORDANCE WITH THE PROCEDURES SET FORTH
IN THIS MANUAL, MAY EXPOSE THE USER TO HAZARDOUS LEVELS OF LASER RADIATION. DO NOT REMOVE
COVERS UNLESS INSTRUCTED TO DO SO BY AUTHORIZED PERSONNEL. DO NOT OPERATE THE UNIT WITH
COVERS REMOVED. REFER ALL REPAIRS TO QUALIFIED SERVICE PERSONNEL.
WARNING: NEVER FORCE FOREIGN OBJECTS INTO THE CD LOADER MECHANISM. NEVER INSERT CRACKED,
BROKEN, OR OTHERWISE DAMAGED DISCS INTO THE CD LOADER MECHANISM. DO NO INSERT DISCS
CONTAMINATED WITH EXCESSIVE DIRT OR STICKY MATERIALS INTO THE CD LOADER MECHANISM. DOING
SO MAY RESULT IN MALFUNCTION OR PERMANENT DAMAGE (WHICH MAY NOT BE COVERED BY YOUR
WARRANTY).
!
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
!
!