User manual

Important Safety Precautions and Explanation of Symbols
!
!
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important installation, operation, and service instructions in this manual.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltages within the enclosure
that may be of sucient magnitude to constitute a risk of electrical shock to the user.
Please read this User Manual thoroughly before attempting to install, congure, or
operate the Mini-X A-100. After successful installation and conguration of the A-100, be
sure to retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read
and follow all instructions and heed all warnings on the A-100 and in this manual. The
vast majority of the subsequent safety precautions are common sense. If you are not
comfortable with the installation of audio/video entertainment equipment, you should
seek the services of a qualied installation professional or call us for help.
WARNING: To prevent the risk of re or electric shock, do not use the Mini-X A-100 near
water or in wet locations and do not expose it to rain or moisture. Doing so may result
in damage to the A-100 and the risk of electric shock, which may result in bodily injury
or death.
WARNING: To reduce the risk of electric shock, do not remove the cover from the
Mini-X A-100. There are no user-serviceable parts inside the A-100. Refer all service to
qualied service personnel.
To reduce the risk of electrical damage, verify that no short circuits are present between
terminals and/or speaker wires before applying power.
Do not install the A-100 near any heat sources such as radiators or heating vents. Avoid
installing the A-100 directly above other heat-producing equipment unless sucient
ventilation or forced-air cooling is provided.
Do not install the A-100 in locations without proper ventilation. The A-100 should not be
operated on a bed, sofa, rug, or similar surface that may block vents. The A-100 should
not be installed in an enclosed location such as a bookcase, cabinet, or closed equipment
rack unless sucient forced-air ventilation is provided.
Connect the A-100 only to power sources of the correct voltage (as shown in this manual
and on the A-100). Ensure that the Input Voltage selector switch on the rear of the A-100
is set to the appropriate voltage.
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be
especially careful where the power cable enters the power outlet and A-100 unit.