UPA-200 UPA-200 Stereo Power Amplifier User Manual
Important Safety Precautions and Explanation of Symbols ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important installation, operation, and service instructions in this manual. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to the user.
The power cable for the UPA-200 should be unplugged from the outlet during severe electrical storms, or when unused for a long period of time. Only replace the fuse in the UPA-200 with a fuse of proper value and voltage rating. The UPA-200 should only be cleaned as directed in the Installation and Operation Manual. Avoid spraying liquids directly onto the unit and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside of the unit.
UPA-200 UPA-200 Stereo Power Amplifier Contents Important Safety Precautions and Explanation of Symbols Introduction..........................................................................................3 About This Manual...............................................................................4 Features..............................................................................................5 Unpacking...........................................................................................
UPA-200 Page 2
UPA-200 Introduction Thank you for purchasing your new UPA-200 stereo power amplifier. The UPA-200 is the perfect choice as the centerpiece of a stereo audiophile system or the muscle for the front channels of a superb home theater system. The UPA-200 delivers 125 watts per channel into 8 Ohms and 200 watts per channel into 4 Ohms of truly dynamic, superb sounding, clean power. The UPA-200 can easily drive inefficient speakers to satisfying sound levels, and sounds great doing it.
UPA-200 About This Manual This manual will provide you with all the information you need to get great performance, accurate sound, and many years of reliable service from your UPA-200 stereo power amplifier. We suggest that you read through the entire manual; we kept things as short and direct as possible. Even if you’re an expert user, you will probably find some interesting information and useful suggestions.
UPA-200 Features The UPA-200 is an audiophile grade stereo power amplifier that combines superb sound quality and outstanding value. Unlike a receiver, which must perform several different functions and must compromise on each in the process, the UPA-200 concentrates on only one thing: delivering clean power to drive your speakers.
UPA-200 Unpacking Your UPA-200 was carefully packed and should reach you in perfect condition. If you notice any shipping damage or other issues when you unpack it, please contact Emotiva immediately. Gently remove your UPA-200 from the packing carton and remove all wrappings and shipping material. It is important to save the box and all packing materials in case your power amp ever needs to be moved or shipped back to the factory for service. Please keep your sales receipt in a safe place.
UPA-200 UPA-200 Front Panel 1 2 CH1 CH2 Standby UPA-200 1. Channel Status LED Illuminates blue for normal operation or red to indicate a fault; may be disabled by rear panel Status LED switch. 2. Standby Button Press to switch amplifier On; press again to return to Standby; button illuminates amber for Standby and blue for On.
UPA-200 UPA-200 Rear Panel 1 2 3 STATUS LEDS OFF INPUT + 5V - 12V DC 5 ON L CH 1 R CH 2 115V | POWER | 230V 4 1 0 OUTPUT - + 12V - DC 6 7 8 1. Status LED Switch Enables and disables the front panel Channel Status LEDs. 2. RCA (unbalanced) Input Unbalanced audio input (gold plated RCA jack; right channel shown). 3. Line Voltage Indicator The UPA-200 automatically detects 115 VAC or 230 VAC line voltage. These indicators show which line voltage is in use. 4.
UPA-200 Quick Start To get the most from your UPA-200, we urge you to read the entire manual. If you just can’t wait to listen to it, this section will cover the basics you need to get started: • • • • • • Find a secure location for your UPA-200. Connect your UPA-200 to a signal source: a pre/pro, a preamp, a DAC with an output level control (we make some nice ones), or even an iPod - as long as it has a variable output level.
UPA-200 Connections Connecting speakers to your UPA-200 Your UPA-200 has no special connection requirements; five way binding posts are provided for connecting one speaker to each channel. • • • • • • • • ALWAYS turn off the amplifier before connecting or disconnecting speaker cables or signal source interconnects. ALWAYS verify that your speaker cables are firmly attached, and not shorted to each other or to any other cables, before powering up your UPA-200.
UPA-200 Configuration and Operation Line Voltage The UPA-200 can operate from line voltages of 115 VAC +/- 10% or 230 VAC +/- 10%; when the unit is powered on, it will automatically detect the correct line voltage and set itself accordingly. AC Power switch (rear panel) The rear-panel AC power switch controls the main AC power for your UPA-200. When this switch is in the Off position, the amplifier will not operate. Turning it On will put the UPA-200 into Standby mode.
UPA-200 Care and Maintenance Periodic Maintenance Your UPA-200 requires no periodic maintenance or calibration. Cleaning your UPA-200 • • If necessary, the UPA-200 should be cleaned gently with a soft rag. If something sticky gets on the front panel or case of the UPA-200, it should be cleaned with a mild cleaning solution applied to a soft rag, followed by wiping with a clean rag dampened with plain water and drying with a soft dry rag or cloth.
UPA-200 Specifications Topology: Fully discrete, dual differential, high current, short signal path Class A/B. Number of Channels: 2 Power Output (rated power; THD < 0.05%): 125 watts / channel (8 ohms; all channels driven). 200 watts / channel (4 ohms; all channels driven). Rated Power Bandwidth (at rated power; 8 Ohm load): 10 Hz to 20 kHz + / - 0.1 dB. Minimum Recommended Load Impedance: 4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel).
UPA-200 Gain: 29 dB. Input Connections: Unbalanced (RCA); one per channel. Input Impedance: 47 kOhms. Trigger: Trigger Input: 5 - 20 V (AC or DC); < 10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 50 mA. Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Front Panel Controls and Indicators: Standby; push button (changes color to indicate Standby or On).
UPA-200 Troubleshooting The UPA-200 is carefully designed and manufactured from high-quality, precision components to ensure years of trouble free operation. We really doubt you’ll ever have any problems with your UPA-200 but, if you do, here are a few things you could try: Problem: No sound is heard from either (any) channel (nothing is lit). Reason: You have no AC power. • • • Verify that the rear panel AC Power switch is On. Verify that your circuit is live.
UPA-200 Emotiva Audio Corporation Five-Year Limited Warranty What does this warranty cover? Emotiva Audio Corporation (“Emotiva”) warrants its products against defects in materials and workmanship. How long does this coverage last? This warranty commences on the date of retail purchase by the original retail purchaser and runs for a period of five years thereafter. This warranty is transferable to any person that owns the warranted product during the Term.
UPA-200 EMOTIVA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATED TO ANY DEFECTS IN OR DAMAGES TO ITS PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. How do you get service? In order to make a claim under the warranty, you must: 1. Call a customer service representative (“CSR”) of Emotiva at 1-877-EMO-TECH (1-877-366-8324).
UPA-200 Accessories Speaker cables Using high-quality speaker cables and audio interconnects will ensure that you get the best sound quality and maximum reliability from your UPA-200 and the speakers connected to it. Emotiva Audio offers high-quality speaker cables and audio interconnects that feature solid engineering, premium build quality, excellent performance, and reasonable cost. You will find them in the Interconnects section of our website at www.emotiva.com.
UPA-200 Notes All information contained in this manual is accurate to the best of our knowledge at the time of publication. In keeping with our policy of ongoing product improvement, we reserve the right to make changes to the design and features of our products without prior notice. User Manual Revision 1.
