Specifications
Page 7
XPR-5
XPR-5 Front Panel
CH1 CH2 CH3 CH4 CH5
STANDBY PEAK DIM METER
1 2
3 4 65
1. Accent Lighting
Blue accent lighting.
2. Channel Status and Meter LEDs
Each channel has a single Channel Status LED (the bottom one), and a blue LED Bargraph
Meter above it. Either or both are activate depending on the conguration chosen. If a fault
occurs on one or more channels of the XPR-5, the LED above the Standby button, and the
Channel Status LEDs and the LED Bargraph Meter LEDs associated with the channel that
is reporting the fault will ash red.
3. Standby Button (and Power LED)
Press to switch the amplier On; press again to return to Standby. The LED above the
button will illuminate red for Standby, blue for On, and blinking red for a Fault condition.
4. Peak Button
Press once to switch the LED Bargraph Meters into Peak Meter mode; press again to select
Peak Hold Mode.