User manual
Page 15
XPR-2
Care and Maintenance
Periodic Maintenance
The XPR-2 power amplier requires no periodic maintenance or calibration.
Cleaning the XPR-2
• If necessary, the XPR-2 should be cleaned gently with a soft rag.
• If something sticky gets on the front panel or case of the XPA-2, it should be cleaned
with a mild cleaning solution applied to a soft rag, followed by wiping with a clean rag
dampened with plain water and drying with a soft dry rag or cloth.
• Use only a soft cloth and AVOID abrasive cleaners or coarse cleaning cloths as they
may scratch the nish.
Note: DO NOT spray water or cleaning solution directly onto the XPR-2 or into
the vents.