User's Manual

Table Of Contents
The information contained in this document is confidential and is the property solely of Empatica, S.r.l.. Any reproduction in part or in whole without
the written permission of Empatica, S.r.l. is prohibited. © Empatica S.R.L, 2021. All rights reserved.
22
Storage and Use Conditions
Storage Conditions
Temperature
-25ºC to +70ºC
Humidity
20 95% Relative Humidity non condensing
Pressure
1060 hPa to 500 hPa
Battery preservation
EmbracePlus can be stored in its original box for a
maximum of 3 months without charging. If EmbracePlus
is not used for more than 90 days make sure to charge it
at least once every 3 months.
After use storage
EmbracePlus should be properly stored. Do not expose
EmbracePlus to direct sunlight, moisture or rain.
Use Conditions
Temperature
(Use) -10ºC to +40ºC
(Charging) 0ºC to +40ºC
Humidity
20 95% Relative Humidity non condensing
Pressure
1060 hPa to 700 hPa
NOTE: After storage at the extreme temperature indicated in the table above allow the device to return
to room temperature (15ºC 30Cº) before wearing EmbracePlus by leaving it at room temperature for
at least 30 minutes.
Dust and Water Resistance
EmbracePlus
You can wear EmbracePlus while taking a shower, or in the rain. You can also wear it in pools (not in
saltwater). You should not submerge EmbracePlus in water that is deeper than 3.3. feet or 1 meter or
for more than 30 minutes. Avoid using EmbracePlus in a hot tub, sauna or steam rooms.
Please note that the Bluetooth connectivity will not work if EmbracePlus is submerged in water, and
thus data cannot be transferred to the paired smartphone. Recorded data will be transferred to the
paired smartphone as soon as the connection is re-established.
EmbracePlus is dust tight, meaning dust will not enter the inner part of the device.
On-Wrist Charger
The On-wrist charger of EmbracePlus is safe to use under the rain. Do not use the On-Wrist charger
while showering or swimming.
On-wrist charger is dust protected, meaning that the ingress of dust is not entirely prevented, but the
quantity of dust that might enter the device will not interfere with the satisfactory operation of the
device.