Installation Manual

INSTALLATION
！The kitchen area should be dry and aired
and equipped with efficient ventilation.
When installing the oven, easy access to
all control elements should be ensured.
！This is a built-in oven, and its back wall
and one side wall can be placed next to a
high piece of furniture or a wall. Coating
or veneer used on fitted furniture must be
applied with a heat-resistant adhesive
(215℉).This prevents surface deformation
or detachment of the coating.
！Make an opening with the dimensions
given in the diagram for the oven to be
fitted.
！Make sure the mains plug is disconnected
and then connect the oven to the mains supply.
！Insert the oven completely into the opening
without allowing the four screws in the places
shown in the diagram to fall out.