Induction Cooktop Instruction Manual / Installation Manual MODEL: EMPV-IDC12 EMPV-IDC24 EMPV-IDC30 EMPV-IDC36
SAFETY WARNINGS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. • Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules. • Alterations to the domestic wiring system must only be made by a qualified electrician.
• This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • WARNING: Use only cooktop guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or cooktop guards incorporated in the appliance.
• During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop surface since they can get hot • Children less than 8 years of age shall be kept away unless continuously supervised. • Handles of saucepans may be hot to touch.
• Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. • Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.
• Care should be taken to avoid touching heating elements. • Children less than 8 years of age shall be kept away unless continuously supervised. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children shall not play with the appliance.
Connecting the cooktop to the main power supply The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown as below. For 4-wire cable from home power supply For 3-wire cable from home power supply If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
Product Overview Top View 1. max. 1.14 Btu/s 2. max. 1.71 Btu/s 3. Control panel EMPV-IDC12 1. max. 1.71/1.99 Btu/s 2. max. 1.14/1.42 Btu/s 3. max. 1.71/1.99 Btu/s 4. max. 1.14/1.42 Btu/s 5. Control panel EMPV-IDC24 1. max. 1.14/1.42 Btu/s 2. max. 2.18/2.84 Btu/s 3. max. 1.71/1.99 Btu/s 4. max. 1.14/1.42 Btu/s 5.
1. max. 1.71/1.99 Btu/s 2. max. 1.14/1.42 Btu/s 3. max. 2.18/2.84 Btu/s 4. max. 1.71/1.99 Btu/s 5. max. 1.14/1.42 Btu/s 6. Control panel EMPV-IDC36 The Control Panel EMPV-IDC12 EMPV-IDC24 1. ON/OFF switch 2. Select power level 3. Setting the timer 4. Child lock 5. Select heating zone 6. Boost control 9 7. Keep warm 8.
EMPV-IDC30 EMPV-IDC36 1. ON/OFF switch 2. Select power level 3. Setting the timer 4. Child lock 5. Select heating zone 6. Boost control 7. Keep warm 8. Pause Product Information The ceramic/induction cooktop can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The cooktop centers on customers and adopts personalized design.
iron pot magnetic circuit ceramic glass plate induction coil induced currents Before using your New Cooktop • • • Read this guide, taking special note of the ‘Safety Warnings’ section. Remove any protective film that may still be on your ceramic cooktop. Remove any protective film that may still be on your Induction cooktop. Using the Touch Controls • • • • The controls respond to touch, so you don’t need to apply any pressure. Use the ball of your finger, not its tip.
• Cookware made by the following materials is not suitable: pure stainless steel, aluminum or copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware. Size of burner (in) 6.30 7.09 8.27 The minimum cookware (diameter /in) 4.72 5.51 6.30 Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone.
4. Select a heat setting by touching the “-”、 “+” Or touching the “slider” control. • If you don’t choose a heat setting within 1 minute, the Induction cooktop will automatically switch off. You will need to start again at step 1. • You can modify the heat setting at any time during cooking. When you have finished cooking 1. Touching the heating zone selection that you wish to switch off 2. Turn the cooking zone off by scrolling down to”0” or Or touching the “slider”. Make sure the display shows”0”.
Cancel Boost function 1. Select the zone with boost function (front left zone). 2. Touching the “slider” to cancel the Boost function, and select the level you want to set. • Boost function can only last for 5 minutes, after that the zone will go to level 9 automatically. Using the Keep Warm function For EMPV-IDC30 EMPV-IDC36 Only Activate the boost function 1. Select the zone with the keep warm function (front left zone). 2.
2. Touching the pause control one more time, all the hearting zones will revert to its original setting. The function is available the one or more hearting zones is working. If you don`t cancel the stop working mode within 30 minutes, the induction cooktop will automatically switch off. Locking the Controls • You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
Auto Shutdown safety feature of the cooktop is auto shut down. This occurs whenever you forget to switch off a cooking zone. The default shutdown times are shown in the table below: Power level Default working timer (hour) 1 8 2 8 3 8 4 4 5 4 6 4 7 2 8 2 9 2 Using the Timer You can use the timer in two different ways: • You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up.
5. set the time by touching the “-“ “+” or touching the “slider”, now the timer you set is 95 minutes. OR 6. When the time is set, it will begin to count down immediately. The display will show the remaining time. 7. Buzzer will bips for 30 seconds and the timer indicator shows “- - “ when the setting time finished. Using the timer to switch off one or more cooking zones 1. Touching the heating zone selection control that you want to set the timer for. 2.
6. When the time is set, it will begin to count down immediately. The display will show the remaining time. NOTE: There will be a red dot in the right bottom corner of power level indication which indicating that zone is selected. 7. When cooking timer expires, the corresponding cooking zone will be switched off automatically. Note: Other cooking zones will keep operating if they are turned on previously. If the timer is set on more than one zone: 1.
Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips • • • • When food comes to the boil, reduce the power setting. Using a lid will reduce cooking times and save energy by retaining the heat. Minimise the amount of liquid or fat to reduce cooking times.
7. Stir the ingredients gently to make sure they are heated through. 8. Serve immediately.
Boilovers, melts, and hot sugary spills on the glass Spillovers on the touch controls Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass cooktops, but beware of hot cooking zone surfaces: 1. Switch the power to the cooktop off at the wall. 2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop. 3. Clean the soiling or spill up with a dish cloth or paper towel. 4.
The induction cooktop makes a low humming noise when used on a high heat setting. Fan noise coming from the induction cooktop. Pans do not become hot and appears in the display. The induction cooktop or a cooking zone has turned itself off unexpectedly, a tone sounds and an error code is displayed (typically alternating with one or two digits in the cooking timer display). This is caused by the technology of induction cooking.
Technical Specification Induction Cooktop EMPV-IDC12 Cooking Zones 2 Zones Supply Voltage 220-240V~ 50/60Hz Installed Electric Power 2.75 Btu/s Product Size D×W×H(in) 11.42x20.47x2.28 Building-in Dimensions A×B (in) 10.63x19.29 Induction Cooktop EMPV-IDC24 Cooking Zones 4 Zones Supply Voltage 220-240V~ 50/60Hz Installed Electric Power 6.82 Btu/s Product Size D×W×H(in) 23.62x20.47x2.28 Building-in Dimensions A×B (in) 22.05x19.
Installation Selection of installation equipment • • Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 1.97in space shall be preserved around the hole. • Be sure the thickness of the work surface is at least 1.18in. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate.
A(in) B(in) C(in) D E 29.92 1.97 mini 0.79 mini Air intake Air exit 0.20in Before you install the cooktop, make sure that • • • • • • • • • The work surface is square and level, and no structural members interfere with space requirements. The work surface is made of a heat-resistant material. If the cooktop is installed above an oven, the oven has a built-in cooling fan. The installation will comply with all clearance requirements and applicable standards and regulations.
Cautions • The cooktop must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. • The cooktop shall not be mounted to cooling equipment, dishwashers and rotary dryers. • The cooktop shall be installed such that better heat radiation can be ensured to enhance its reliability. • The wall and induced heating zone above the work surface shall withstand heat.
This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way. The symbol on the product indicates that it may not be treated as normal household waste.
