Installation Guide

22
7
Problem Description
Possible Reason
Suggestion
Baking effect is not ideal
Grilling rack is not placed
properly
Put the grilling rack in the
appropriate layer of the
cavity and preheat the oven
Oven lamp is not lighted
Oven lamp broken Replace the oven lamp
The oven is not lighted
Control board damaged
Self-priming valve damaged
Ignition pin offset
Ignition pin damaged
Replace the control board
Replace the self-priming valve
Adjust the installation position
of the ignition pin so that the
spark can hit the fire hole
Replace the ignition pin
Oven combustion cannot
maintain
The ion induction pin is not
installed in place
Adjust the installation of
induction pin so that the flame
can burn the induction pin
Abnormal pressure
Use the correct air supply
pressure
Flameout during use
Abnormal oven temperature
Insufficient oxygen in the
cabinet
Install cabinet with holes as
required
Ion induction pin damaged
Replace ion induction pin
Pressure regulator does not
work Pressure is unstable
Replace the regulator
The sensing probe of
thermostat valve is not
installed in place
Adjust the sensing probe of
thermostat valve, install it on
the fixed bracket
Thermostat valve failure
Replace the thermostat valve
Fan damaged
Replace the fan
Cooling fan does not work
The thermostat controlling
the cooling fan damaged
Replace thermostat
Hot air motor does not work
Fan damaged
Replace the fan
Abnormal sound of fan
There is foreign matter in the
fan blowing the blade
Clean up foreign matters to
avoid blowing the fan blades
locking fan blade nut of hot
air motor loose
Retighten the nut
The whole machine is
powered off
Cooling fan damaged Replace the cooling fan
Loose plug
Test plug and socket to ensure
reliable contact
VERY IMPORTANT NOTE:
The above replacement operations must be operated by professionals!
The manufacturer cannot be held re
spon
sible for possible inaccuracies due to printing or transcription errors in
the present booklet.
The manufacturer re
serves the right to make all modifications to its products deemed necessary for manufacture
or commercial reasons at any moment and without prior notice, without jeopardising the es
sential functional and
safety characteristics of the appliances.
This product is only suitable for use of natural gas. If you need to change other
types of gas, please contact:
www.empava.com
Phone:[phone]
Email:[e-mail]
Distributed by:Empava Appliances Inc.
15253 Don Julian Rd, City of Industry, CA 91745 USA