Use and Care Manual

INSTALLATION MANUAL | Empava Appliances Inc.
- 7 -
2-5. Apply a thick layer of silicon sealant around the bath outline allow
it set 24 hours.
This installation guide, the installation of waste connection should be only
suitably by qualified person.
3. Cleaning and Maintenance Tips
3-1. In time to clean. To clean convenient, it is suggested that
immediately wash the bath after taking a bath. This time will be expanded
easily to remove dirt and soapsuds, after a long time will accumulate in
the tub wall and difficult to remove, especially in places where hard water
quality in high calcium content, after a long time will form macular at the
bottom of the tub wall and faucet.
3-2. Cleaning method. Use soft cloth with neutral detergent or soap
water.
3-3. Some attentions. It is strictly prohibited to use sharp objects or hard
clean tool friction bath, in order to avoid scratch the bath surface, away
from open flame, high temperature bulb, cigarette butts etc, so as not to
burn the bath surface, Avoid the use of the paint, varnish removal agent