COMPRESSOR BEVERAGE COOLER User Manual EMPV-BR01S EMPV-BR02S EMPV-BR03D Please read this user manual before using this product EMPAVA APPLIANCES INC 15253 DON JULIAN RD CITY OF INDUSTRY.CA 91745 TEL:888-682-882 WWW.EMPAVA.
CONTENT 1. Before First Use....................................................................................4 2. Important Safety Measures and Instructions...................................4 3. Warning and Cautions......................................................................... 5 4. Specifications........................................................................................ 7 5. Device Overview...................................................................................8 6.
Thank you for choosing our product. If operated and taken care of properly in accordance with these instructions, this appliance will be useful for many years. 1. Before First Use Before first use, remove any stickers or similar from the appliance except for the rating label. Dispose of any plastic bags as they pose a risk of suffocation to young children. Please read this manual before operating the appliance and keep it in a safe place for future reference.
3. Warning and Cautions Do not connect the appliance to the mains if the appliance itself or the power cord or the plug are visibly damaged. Never try to repair the appliance yourself. If the appliance does not operate properly, please contact the shop you purchased the appliance at. Original spare parts should be used only. When the power cord is damaged, it must be replaced by the manufacturer or an authorized after sales service or a qualified professional only.
Disconnect the appliance from the mains before you clean or maintain it. Do not use any electric appliances inside the food storage compartments of your appliance unless they are recommended by the manufacturer of your refrigerator. Do not put any heat-radiating appliances onto your appliance. Do not install the appliance in a place where it may come in contact with water/rain, otherwise the insulation of the electrical system will be damaged.
4. Specifications MODEL EMPV-BR01S EMPV-BR02S EMPV-BR03D EMPV-BR04D VOLUME 84L 147 L 1 123L L 1 177L L VOLTAGE AC 110-120V AC 110-120V AC 110-120V AC 110-120V FREQUENCY 60Hz 60Hz 60Hz PROTECTION TYPE I I I I CLIMATE CLASS SN.N SN.N SN.N . SN.N . INPUT POWER 90 Watt 90 Watt 110Watt 110 Watt .h/ 0.371 Kw.h/24h 0.492 Kw.h/24h .h/ h ENERGY CONSUMPTION 0.257 Kw.h/24h 0.402 Kw.h/24h TEMPERATURE RANGE 38-50℉ (3-10℃) 38-50℉ (3-10℃) NET WEIGHT PRODUCT DIMENSION 71.
EMPV-BR01S 8
Model No.: EMPV-BR02S 1. NTC point 2. Light switch 3. Temperature display 4. Light 5. ℉/℃ Switch 6. Temperature switch 7. Fan 8. Exhuaust window 9. Shelf 10. Body 11. Exhuaust window 12. Foot 13. Glass 14. Door seal 15. Door frame 16. Lower hinge 17.
Model No.: EMPV-BR03D 1. Left light switch 2. Left temperature setting 3. left temperature display 4.Left temperature setting 5. Left upper hinge 6. Power switch 7. Left fan 8. Left light 9. Exhaust window 10. Door frame 11. Left glass 12. Left door seal 13. NTC point 14. Shelf 15. Carbon filter 16. Exhaust window 17. Foot 18. Lock 19. Right light switch 20.Right temperature setting 21.. Right temperature display 22.. Right temperature setting 23 . Right upper hinge 24 .
Model No.: EMPV-BR04D 1. Left light switch 2. Left temperature setting 3. left temperature display 4.Left temperature setting 5. Left upper hinge 6. Power switch 7. Left fan 8. Left light 9. Exhaust window 10. Door frame 11. Left glass 12. Left door seal 13. NTC point 14. Shelf 15. Carbon filter 16. Lock catch 17. Exhaust window 18. Foot 19. Lock 20. Right light switch 21.. Right temperature setting 22.. Right temperature display 23 . Right temperature setting 24 .
6. Before Initial Operation Leave the appliance in an upright position for 4–6 hours before you connect it to the mains. Clean the appliance thoroughly. Be very careful, especially inside the appliance (see chapter Cleaning and Maintenance). The appliance must be connected to the mains properly. Allow the appliance to stabilize the temperature for approx. 24 h before use. Do not overfill the appliance.
7. Temperature Setting Model No.: EMPV-BR01S / EMPV-BR02S Temp. Increase Lighting Switch Temp Display ℉/℃ Switch Temp. Decrease Temperature range: 38-50℉（3-10℃）. Flashing LED = Setting mode of the temperature. Constant LED = Cooling temperature. Model No.: EMPV-BR03D / EMPV-BR04D Temp. Increase Lighting Switch Temp Display Power Switch Temp. Decrease Temperature range: Left Zone:40-66℉（5-18℃）;Right Zone:38-50℉（ 3-10℃） Flashing LED = Setting mode of the temperature.
8. Operation 1. 2. 3. 4. 5. 6. The appliance can only reach the relevant temperatures when: The ambient temperature meets the climatic class. The doors close properly. You do not open the doors too often or too long. The door seals are in proper condition. The appliance is properly positioned. You have not overfilled the appliance. 7. You do not store warm or hot food in the appliance. 9. Energy Saving Try opening the door as little as possible, especially when the weather is warm and humid.
External Cleaning Use a moist cloth and a mild, non-acid detergent. Use clear water to rinse. Try the cleaned surfaces with a cloth. Internal Cleaning Clean the shelves and the other removable parts with warm water and a mild, non-acid detergent. Use clear water to rinse. Dry the cleaned surfaces with a cloth. Clean the interior with water and a mild, non-acid detergent. Use clear water to rinse. Dry the cleaned surfaces with a cloth. Check the water drain and clean it if needed. 11.
To reverse the door swing: As you received your wine cooler, the door swings open at the left.If you wish to reverse the swing so that the door opens from the right,it is most important too have at least one other person to help.It is very dangerous to try to reverse the door swing by yourself,without anybody’s help the door might fall and glass might be broken,which is terribly dangerous. Suggest Cabinet Dimension: EMPV-BR01S 22.4” 33.9” >34.1” 14.8” .3” >22 >15 .
EMPV-BR03D 22.4” ” 23.4 >33.9” 33.9” >22 .4” .8” >23 EMPV-BR04D ” 29.8 >34.1” 33.9” >22 .4” .9” >30 Installation Drawing 17 22.
Spare Parts Details: Spare Parts Pictures Use Upper Hinge To switch the door open from EMPV-BR01S EMPV-BR02S right. Bottom Hinge To switch the door open from EMPV-BR01S EMPV-BR02S tight. Screw x 2 For the handle installation. EMPV-BR01S EMPV-BR02S EMPV-BR03D EMPV-BR04D Gasket x 2 For the handle installation. EMPV-BR01S EMPV-BR02S EMPV-BR03D EMPV-BR04D To lock the door.
13. Trouble Shooting POSSIBLE CAUSE MEASURE The plug of the appliance is not Check the corresponding socket by connected to the socket. connecting it with another appliance. The plug has become loose. Check the fuse box. • The socket is not supplied with energy. • The fuse is switched off. • The voltage is too low. Compare the data on the model plate with the data of your energy supplier. The door was frequently opened. Close the door properly. The door is not properly closed. Do not overfill.
14. Decommission If the appliance is not used for a longer period of time: 1. Draw the plug out of the socket. 2. Remove all food stored in the appliance. 3. Dry the inside of the appliance with a cloth and leave the door open for a few days. While away on an average vacation/holiday (14–21 days): 1. 2. 3. 4. Do the same as described above, or do not let the appliance operate. Remove all perishable food from the cooling compartment. Clean the cooling compartment.
15. Electrical Circuit Diagram Model No.: EMPV-BR01S Model No.
Model No.: Model No.
