TABLE OF CONTENTS I. Important Safety Information 1-2 Il. Control Panel Overview 34 111. Specifications & How to Use 5-9 IV. Notes on using your Cook top 9 V. Operational Cook top Noises 10 VI. Compatible Cookware 11 VII. Cleaning and Maintenance 12 VIII. Installation Instructions 13-17 IX. Troubleshooting Guide 18-19 Thank you for purchasing EMPATHY INDUCTION COOK TOP. Please read the entire instruction manual prior to using your unit.
» When using electrical appliance, basic safety precautions should always be followed. For this induction cock top, even with the built-in safety features, it is essential to heed all precautions. * Installation of the appliance into a kitchen counter top and its connection to the main power and electrical supply may only be performed by a qualified person. » While cooking fat or oil on the cook top may ignite. There is a risk of burning and fire; therefore, never leave the cook top unattended at anytime.
* Do not place metallic objects such as knives, forks, spoons, lids, cans or aluminum foil on the cook top. * [tis important to be aware that the unit's surface will remain hot for a period of time after use. » When possible, unplug the cook top from the outlet when not in use and before cleaning. Allow to cool before performing any maintenance or repairs. + Clean cook top with caution do not clean while unit is still hot, some cleaners product steam or fumes if applied to a heated surface.
. Left Cooking Zone . Right Cooking Zone , Ceramic Glass A sett Left touch control panel oi Bb WNR . Right touch control panel Diagram may look different from actual product. Child safety lock 11.Function selection 7. Timer control key 8. Lower power or temp key 9. Power or temp option display 10.
1.Rear Cooking Zone 2.Front Cooking Zone 3.Control panel 4.Ceramic glass Diagram may look different from actual product. bb 4 5. Child safety lock 9. Lower power or temp key 6. Timer control key 10. Raise power or temp key 7. Cooking element symbol light 11. Main power on/off 8.
Specifications Product dimensionless} inch 13% x20%" x 2%" 20%" x 14%" x 2%" Cut-out dimension) inch Min appealing, Min down, Voltage (volts) 120 120 Frequency (Hz) 60 60 Total power (Watts) 1800 1800 Minimum circuit breaker Amperage 20 20 Elements 2 2 Front 1800W N/A Rear 1800W N/A Left N/A 1300W Right N/A 1300W Standby Mode Upon inserting the power plug into an electric socket, induction cook top will make a “beep”sound once, and all the digital lights on the cook top will blink once, indicating the unit
Induction cook top with 2 Horizontal Burners Readiness Mode While in the Standby Mode, press the “ON/OFF” key, it will make a “beep” sound once and “ON/OFF” indicator light will be blinking, indicating that the induction cook top functions are ready to use. The unit will automatically return to standby mode if Function is not turned on within 60 seconds. Turning Off Unit When use of the cook top is complete, press the “ON/OFF” key.
Induction cook lop with 2 Horizontal Burners Power Sharing When both burners are on, one of the two burners would not have a power level higher than 1300W. Both of them together would not be more than Max 1800W. If only one burner is on, the heating zone can maintain its full heat setting, but when operating both burners, their combined total is Max 1800W, meaning that when operating the two burners at the same time, they will self adjust levels accordingly.
Induction cook lop with: 2 Vertical Burners Readiness Mode While in the Standby Mode, press the “ON/OFF” key, it will make a “beep” sound once and “ON/OFF” indicator light will be blinking, indicating that the induction cook top functions are ready to use. The unit will automatically return to standby mode if Cooking Element Symbol is not turned on within 60 seconds. To Turn Off Unit 1.
Induction cook lop with: 2 Vertical Burners While cooking, touch the Timer key pad until time light of the desired cooking element is ON, Time digital display reads “00” and blinking; Touch key to set the desired number, Once the Timer is set and key are pressed for 5 seconds, the Minute Timer begins the countdown and the timer display will stop blinking and will stay on in the display.
Cookware Noise The induction fields are generated by electronics equipment, which are pretty much silent but they do produce heat at high power level. A soft-sounding cooling fan run when the unit is running multiple cooking elements at high settings at once or when a cooking element is set at very high power settings. What can sometimes produce sound with induction cooking is not the induction equipment but the cookware Itself. Slight sounds may be produced by different types of cookware.
The quality of your cocking is dependent on the cookware you use. Because induction cooking requires a magnetic vessel for heating, only certain materials can be used on your cook top. Proper Cookware Flat-bottom pots or pans with diameter from (4.7 to 10.
Please follow these directions along with Important Safety steps for cleaning, advised at the beginning of the manual. Use a ceramic glass cleaner on the glass cook top. To maintain and protect the surface of your glass cook top, follow these steps: Before using the cook top for the first time, clean it to protect the top and makes cleanup easier. 1. Daily use of ceramic glass cleaner when the cook top is cool will keep the cook top locking new. 2. Shake the cleaning solution well.
USE COUNTER TOP Please find 4 feet in the packaging, you can screw them into the bottom of the unit, then the unit can be used directly on the counter top. take out screw before installing take out screw before installing Parts take out screw take out screw before installing before installing USE DROP-IN This appliance is not user serviceable. Installation must be completed by a qualified technician.
Cook top Installation 1. Cut an opening in the counter surface. Refer tithe drawings on the following pages for appropriate dimension sizes and follow these instructions: » Select heat-resistant table material to avoid damage caused by heat radiation. * Ensure that the underside of the induction cook top is well ventilated and the air inlet is not blocked. » The distance between the cook top and any cupboard above the appliance should be at least 30 inches. 2.
Installation Inuit cook top wilt 4 Horn! Bide 120V 60Hz 1800W 20% "(520 14 (360) 14%" rout (360) EA (Bath SIDES) py Min27{51) 7; h Edge of Cutout to Rear J Edge of Counter top OVERALL DEPTH : —» OVERALL WIDTH Min Max 13%" (350) Min 19%" (492) Max 19148 (500) | 2 (641Min Fran Edge of Cutout to Front Edge of Counter top Pe Overall Dimensions {HAIR COBRA WHR 2 Horizontal! Buries Overall Width 20% "(520) in i732 2 Min 5 overall Height von Minimum Height Clearance 5%; "(132) Cut-Out Depth Min / Max f Cut-Out Wid
Installation Indication cooking ily 2 Vertical Bungs 120V 60Hz 1800W 20%" (520) OVERALL DEPTH — >| OVERALL WIDTH Overall Dimensions induct or cookie with 2: Vertical Burners Overall Width 134; "(340) Overall Depth 20%, "(520) Overall Height 2% "(55) Minimum Height Clearance Cut-Out Depth Min / Max Cut-Out Width Min / Max 16 Edge of Cutout to Rear Edge of Counter top Min 19% Max Min CUT-OUT TO COMBUSTIBLE MATERIALS {BOTH SIDES) Min Max SS Edge of Cutout to Front Edge of Counter top z Max (762)
After Installation 1. Remove all the stickers and items from the top of the cook top surface. 2. Clean cook top before use. Dry with a soft cloth. See Cleaning Your Cook top for reference. 3. Read Using The Cook top. 4. Turn on the power to the cook top. 5. Verify all function operation properly. NOTE: If the cook top does not work, or you met any problem in your operation, please check that the circuit breaker has not tripped or the house has not blown.
If the display shows an error code, please refer to this sheet for a potent * Cook top does not work * Cook top controls are locked ® Power outage turned * Make sure Lock mode off © Check house lights to confirm power outage * Contact manufacturer ® Cook top does not heat * No cookware or improper cookware placement on the cooking Zane * Incorrect cookware size for the selected cooking zone » Cookware is not properly resting on cooking zone # Incorrect Cooking Zone selected ® No power to cook top * Make sur
If the display shows an error code, please refer to ti « Power sharing * When two heating zones are turned on, will create a total max power 1800W sheet for a potential solution. *See POWER SHARING » “Appears in the digital display * LGBT (Insulated Gate Bipolar Transistor) overheating *Turn off unit to allow LGBT to cool.