ara Appliances USE AND CARE GUIDE Induction Cook top Models EMPV-IDC24 EMPV-IDC30 EMPV-IDC36 Distributed by Empathy Appliances Inc. Add:15253 Don Julian Road, City of Industry, CA, 91745 @. ° » WWW.EMPAVA.
TABLE OF CONTENTS Important Safety Instructions... Cook top Features Using The Cook top. Operational Cook top sere chess sms see 16 Compatible isms sas sss sense chess sn chess mas 17 Cleaning Your Cook top. Troubleshooting Guide. Installation Instructions Thank you for purchasing EMPATHY INDUCTION COOK TOP. Please read the entire instruction manual prior to using your unit. Before installation, record the model and serial number as found on the front of your cook top.
[Le 237-1 ll Neap these instructions handy for future use, The appliance is manufactured in compliance with the relevant safety standard. WARNING Read all instructions carefully before installation and operation of the appliance. WARNING Failure to follow these warnings could result in a fire or explosion that causes property damage, personal injury or death.
| WARNING Cleaning Safety AH FAILURE Environment of Unit = Do not use steam cleaners or high pressure cleaners to clean the cook top, as this may result in electric shock. Condition of Unit . WARNING Do not operate any appliance with a damaged cord or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment. + AA IMPORTANT Do Not Cook on Broken Cook top.
Environment of Unit +» Do not put detergents or flammable materials in the equipment installed under the cook top. While cooking any overflowed fat or oil on the cook top may ignite. There is a risk of burning and fire; therefore, control the cooking process at all times. The use of accessory attachments not . recommended by the appliance manufacturer may cause injuries. Items with a magnetic field such as: radios, televisions, credit cards, * cassette tapes etc., can affect the unit.
Service and Repair Safety . WARNING Do not repair or replace any part of the appliance unless specifically recommended in the manual. All other services should be referred to a qualified technician. This product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
oo BOE oo HE@E 24" Model EMPV-IDC24 1. Front left cooking element control area 2. Rear left cooking element control area 3. Rear right cooking element control area 4, Front right cooking element control area 5. Ceramic glass 6. Touch control panel Minuter timer 8. Decrease power or time 9. Increase power or time 10. Cooking element symbol and Power ON 11. Power level and residual heat display 1 bE 6 S658 12. Power boost 13. Stop/Go 14. Controls Lock 15.
30" Model EMPV-IDC30 Left rear cooking element —. Left front cooking element . Right rear cooking element . Right front cooking element . Ceramic glass . Left rear cooking element control area . Left front cooking element control area ow ~N oOo Right front cooking element control area 9.
30" Model EMPV-IDC30 10. Controls Lock 11. Controls Lock indicator light 12. Main Power On/Off 13. Main Power indicator light 14 .Stop/Go indicator light 16. Cooking element symbol and Power On/Off y 17. Power Boost 18. Increase power Decrease power 20. Power level and Residual heat display 21. Minute timer 3 8 22. Minute timer setting Up 23. Minute timer setting Down 24.
36" Model EMPV-IDC36 COT Cpr Left rear cooking element . Left front cooking element . Right rear cooking element . Right front cooking element Center cooking element 6. Ceramic glass 7. Left rear cooking element control area 8. Left front cooking element control area 9. Center cooking element control area 10. Right front cooking element control area 11.
36" Model EMPV-IDC36 . Controls Lock . Control Lock indicator light . Main Power On/Off . Main Power indicator light . Power On/Off . Increase power . Decrease power . Power Boost . Cooking element symbol . Power level and Residual heat display . Minute timer . Minute timer setting Up . Minute timer setting Down .
Specifications Product dimensionless) Inch 23%. 00%. "x 2%" 30°x 21° 2%" Cutout dimension) inch Mpg age Finish, Voltage (bolls) 240 240 Frequency (Hz) 60 80 Toll power (Watts) 7400 7400 Minimum circuit breaker Amperage 30 40 Elements 4 4 Front Left 2100W/2700W 2100W/2500W Rear Left 1600W/2000W 1600W/2000W Front Right 1600W/2000W 1400W/ 1800W Rear Right 2100W/2700W 2300W/2700W Center N/A N/A Heat Setting Displays Min 3575," x 19%" Max.
This manual covers different models. The cook top you have purchased may have some or all of the features listed. Controls Lock * Controls Lock is activated when the cook top is off: Controls Lock prevents activation of any sensor key, except for the Lock key pad, so you must deactivate the control lock firstly, then touch the main POWER key pad to turn on the cook top.
Power Management Touch key or key to adjust the desired power level; NOTE: During cooking, the unit is equipped with safeguards against parching. NOTE: Heating will appear intermittent phenomenon when cooking element is used for frying, stir-frying, grilling and other high temperature cooking formats. Automatic Power Level Control The power level displayed may be different from the actual power level at the power sharing and high temperature range.
Power Sharing Four or five cook tops are divided into two separate cooking area, the right and left side cooking elements share power of a inverter. Power sharing is activated when the cooking element in the same area are activated; the controls adjust the power automatically for “Power Sharing”. This power sharing is administered by unit's microprocessors, which will alternate power in one area. WEE ofp OE@E = Left Zone Right Zone 24" (59¢m) Model EMPV-IDC24 Right Zone 36" (91.
Residual Heat Indicator All of the buttons are inactive except for Stop/Go, Lock and ON/OFF and POWER key. H If no any key are touched within 10 i i minutes, all of the active cooking After using any of the Cooking zones are automatically switched off. Element, the cooking area will remain hot. Even after turning off the entire unit, the surface of the To turn off oo cook top will remain hot for some Touch Stop/Go key again within 10 time.
Set Timer Use or key to adjust and set the desired time. Short key press adjusts the time by 1 minute and a long key press by 10 minutes. The automatic timer settings range from 1 minute to 99 minutes. (NOTE: There is no “seconds” and “hours” display, only minutes.) The red dot next to the Time symbol indicator will illuminate indicating that the cooking elements is selected.
Cookware Noise The induction fields are generated by electronics equipment, which are pretty much silent but they do produce heat at high power level. A soft sounding cooling fan run when the unit is running multiple cooking elements at high settings atone or when a cooking element is set at very high power settings. What can sometimes produce sound with induction cooking is not the induction equipment but the cookware itself. Slight sounds may be produced by different types of cookware.
The quality of your cooking is dependent on the cookware you use. P Because induction cooking requires a magnetic vessel for heating, only certain materials can be used on your cook top. Induction requires pots and pans that are made of ferrous(meaning magnetic) materials. Check your cookware’s retail box for the induction symbol. To tell if your current cookware is compatible with the induction technology, grab a magnet and see if it holds to the bottom of the cookware.
Cleaning Your Cookie Please follow these directions along with Important Safety steps for cleaning, advised at the beginning of the manual. Use a ceramic glass cleaner on the glass cook top. To maintain and protect the surface of your glass cook top, follow these steps: Before using the cook top for the first time, clean it to protect the top and makes cleanup easier. 1. Daily use of ceramic glass cleaner when the cook top is cool will keep the cook top looking new. 2. Shake the cleaning solution well.
9 If you encounter the following problems while using your cook top, check the guide below to see if you can correct the problem yourself before calling for assistance or service: * Cook top does not work * Cook top does not heat » Cook top turns off while cooking « Cook lop controls are locked » Power outage « [installation wire not complete » Circuit breaker has tripped or fuse Is blown » No cookware or improper cookware placement on the cooking element * Incorrect cookware size for the selected cooking e
9 If you encounter the following problems while using your cook top, check the guide below to see if you can correct the problem yourself before calling for assistance or service: © Power boost does not work * The fans keep running for ane minute after the cooking element has been switched off = "E*appears in the Power display * “Appears in the Timer display * *E1” appears in the Timer display = "£2" appears in the Timer display * Boos function Is nat available if adjacent burner is in use and toll parer re
IMPORTANT SAFETY INFORMATION WARNING Installation and service must be performed by a qualified installer or service technician. [Le villi Read and save these instructions for future reference. A DANGER Always read and obey all safety information, failure to follow these instructions can be killed or seriously injured. Before Installing the cook top 1. Visually inspect the cook top for damage. Also make sure all cook top screws are on tight. 2.
The Induction Cook tops must connect to a separate, grounded wire, single phase, AC Only electrical supply with their own circuit breaker. These appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. This appliance must be supplied with the proper voltage and frequency and amperage, which is protected by a properly sized circuit breaker or time delay fuse.
If 4-Wire Cable from Home Power Supply IMPORTANT: Use the 4-wire cable from Home Power Supply where local codes do not allow grounding through neutral.
Installation — 24" (59cm) Model EMPV-IDC24 Cook top Dimensions A, Width B. Depth C. Height 23%," (590) | (520) | NOT obstruct these areas. Junction box IMPORTANT: For perfect Vent 457114) ventilation, provide a vent of under the counter top, in the front of the cabinet and in the back of the cabinet. The ventilation opening is to Min extend the full length of the ~~ cook top cutout. Front Min Max Vent EMPV-IDC24 Cook top and Cutout Dimension re 27" (888) Recommended —| Cabinet Width 24° min (610) 307762) .
Installation — 30" (76.2cm) Model EMPV-IDC30 A. Width B. Depth C. Height 307762) 217(533) < Cook top Dimensions NOT obstruct these areas. Junction box IMPORTANT: For perfect Vert ventilation, provide a vent of under the counter top, in the front of the cabinet and in the back of the cabinet. The ventilation opening is to Min extend the full length of the ~~ cook top cutout.
Installation — 36" (91.4cm) Model EMPV-IDC36 Cook top Dimensions A, Width B. Depth C. Height 367914) 21533) | *DO NOT obstruct these areas. Junction box IMPORTANT: For perfect Vert ventilation, provide a vent of under the counter top, in the front of the cabinet and in the back of the cabinet. The ventilation opening is to Min extend the full length of the ~~ cook top cutout. 447114) Front Min 35%.
fg A CAUTION Iris very important to keep 2% (70mm) distance between the cook top and the — oven. Note:do not pita OVEN divider between the oven and cook top Spacer Graphic Profile Counter top 5 Do not remove spacer NOTE:The cook tops include spacers on both sides to ensure proper airflow once installed.Do not remove the spacers.
After Installation 1. Remove all the stickers and items from the top of the cook top surface. 2. Clean cook top before use. Dry with a soft cloth. See Cleaning Your Cook top for reference. 3. Read Using The Cook top. 4. Turn on the power to the cook top. 5. Verify all function operation properly. NOTE: If the cook top does not work, or you met any problem in your operation, please check that the circuit breaker has not tripped or the house has not blown.
