Induction Cooktop Instruction Manual / Installation Manual MODEL: EMPV-36EC01 EMPV-30EC02 EMPV-24EC03
IMPORTANT INSTRUCTION PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. 1) Proper Installation – Be sure your appliance is properly installed and grounded by a qualified technician. 2) Never Use Your Appliance for Warming or Heating the Room. 3) Do Not Leave Children Alone – Children should not be left alone or unattended in area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance.
liners may result in a risk of electric shock, or fire. 13) Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.
these instructions for installation. 24)This appliance is to be properly installed and earthed only by a suitably qualified person. 25) This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. 26) WARNING: Use only cooktop guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or cooktop guards incorporated in the appliance.
become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop surface since they can get hot. • Children less than 8 years of age shall be kept away unless continuously supervised. • Handles of saucepans may be hot to touch. Check saucepan handles do not overhang other cooking zones that are on.
• • • • • • • • • • • stand, or climb on it. Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. Do not leave children alone or unattended in the area where the appliance is in use. Children or persons with a disability which limits their ability to use the appliance should have a responsible and competent person to instruct them in its use.
• WARNING: The appliance and its accessible parts become hot during use. • Care should be taken to avoid touching heating elements. • Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • WARNING: Unattended cooking on a cooktop with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
Connecting the cooktop to the main power supply The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker. The method of connection is shown as below. For 4-wire cable from home power supply For 3-wire cable from home power supply If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
Product Overview Top View 1. max. 1800/2100W zone 2. max. 1200/1500W zone 3. max. 2300/3700W zone 4. max. 1800/2100W zone 5. max. 1200/1500W zone 6. Control panel EMPV-36EC01 1. max. 1800/2100W zone 2. max. 1200/1500W zone 3. max. 2300/3700W zone 4. max. 1200/1500W zone 5. Control panel EMPV-30EC02 1. max. 2300/3000W zone 2. max. 1200/1500W zone 3. max. 1800/2100W zone 4. max. 1200/1500W zone 5.
The Control Panel EMPV-36EC01 EMPV-30EC02 EMPV-24EC03 1. ON/OFF switch 2. Select power level 3. Setting the timer. 4. Child lock 5. Heating zone 6.
Product Information The ceramic/induction cooktop can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The cooktop centers on customers and adopts personalized design. The cooktop has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life.
Choosing the right Cookware • • Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging or on the bottom of the pan. • You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the base of the pan. If it is attracted, the pan is suitable for induction. • If you do not have a magnet: 1. Put some water in the pan you want to check. 2. Follow the steps under ‘To start cooking’. 3.
Using your Cooktop - EMPV-36EC01 / EMPV-30EC02 • After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that the cooktop has entered the state of standby mode. 1. Touch the power ON/OFF indicator show “——“. switch, the timer 2. Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the cooking zone is clean and dry. 3. Touching the heating zone ON/OFF control, the heating zone indicator show “—“.
Using Boost function- EMPV-36EC01 / EMPV-30EC02 Activate the boost function Touching the heating zone ON/OFF control and touching “ +” until power level indication shows “P”. Cancel Boost function Touching the “—” to cancel the Boost function, and select the level you want to set. • Boost function can only last for 5 minutes, after that the zone will go to level 9 automatically.
• You can modify the heat setting at any time during cooking. When you have finished cooking 1. Touching the heating zone selection that you wish to switch off. 2. Turn the cooking zone off by touching the “—” control, make sure the display shows”0”. “+” 3. Turn the whole cooktop off by touching the ON/OFF control. 4. Beware of hot surfaces “H” will show which means cooking zone is too hot to touch. It will disappear when the surface has cooled down to a safe temperature.
Locking the Controls • • You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on). When the controls are locked, all the controls except the ON/OFF control are disabled. To lock the controls Touch the keylock control,the timer indicator will show “Lo “. To unlock the controls 1. Make sure the cooktop is turned on. 2. Touch and hold the keylock control for 3 seconds. 3. You can now start using your cooktop.
Using the Timer You can use the timer in two different ways: You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up. You can use it as cut-off timer to turn one or more cooking zones off after time is up. * You can set the timer up to 99 minutes. Using the Timer as a Minute Minder 1. Make sure the cooktop is turned on. And zone selection key is not activated (zone indication ‘-‘is not blinking).
2. Touch timer control, the “00” will show in the timer display. and the “0” flash. 3. Set the time from 1~99 minutes by touching the “—” “+” control of the timer (e.g. 5) 4. When the time is set, it will begin to count down immediately. The display will show the remaining time. NOTE: There will be a red dot in the right bottom corner of power level indication which indicating that zone is selected. 5. When cooking timer expires, the corresponding cooking zone will be switched off automatically.
Cancel the timer 1. Touching the “—” “+” control of heating zone that you want to cancel the timer. 2. Touching the timer control, the indicator will flash. 3. Touch the “—” “+” at the same time to set the timer to “00”, the timer is canceled. Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk.
2.Heat up a heavy-based frying pan. 3.Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat onto the hot pan. 4.Turn the steak only once during cooking. The exact cooking time will depend on the thickness of the steak and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press the steak to gauge how cooked it is – the firmer it feels the more ‘well done’ it will be. 5.
Care and Cleaning What? How? Boilovers, melts, and hot sugary spills on the glass Remove these immediately with a fish slice, palette knife or razor blade scraper suitable for ceramic glass cooktops, but beware of hot cooking zone surfaces: 1. Switch the power to the cooktop off at the wall. 2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop. 3. Clean the soiling or spill up with a dish cloth or paper towel. 4.
Hints and Tips Problem Possible causes What to do The cooktop cannot Be turned on. No power. The touch controls are unresponsive. The controls are locked. The touch controls are difficult to operate. There may be a slight film of water over the controls or you may be using the tip of your finger when touching the controls. Rough-edged cookware. Make sure the cooktop is connected to the power supply and that it is switched on. Check whether there is a power outage in your home or area.
The induction cooktop or a cooking zone has turned itself off unexpectedly, a tone sounds and an error code is displayed (typically alternating with one or two digits in the cooking timer display). Technical fault. Please note down the error letters and numbers, switch the power to the induction cooktop off at the wall, and contact a qualified technician.
Technical Specification Induction Cooktop EMPV-36EC01 Cooking Zones 5 Zones Supply Voltage 240V~ Installed Electric Power 9300W Product Size D×W×H(in) 36 x 21 x 2-5/16 Building-in Dimensions A×B (in) 33-7/8 x 19-5/16 Induction Cooktop EMPV-30EC02 Cooking Zones 4 Zones Supply Voltage 240V~ Installed Electric Power 7200W Product Size D×W×H(in) 30 x 21 x 2-5/16 Building-in Dimensions A×B (in) 28-3/4 x 19-5/16 Induction Cooktop EMPV-24EC03 Cooking Zones 4 Zones Supply Voltage 240V~
Installation Warning: To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.
Selection of installation equipment • • • • Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 1-31/32 in space shall be preserved around the hole. Be sure the thickness of the work surface is at least 1-3/16 in. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate.
Before you install the cooktop, make sure that • • • • • • • • • The work surface is square and level, and no structural members interfere with space requirements. The work surface is made of a heat-resistant material. If the cooktop is installed above an oven, the oven has a built-in cooling fan. The installation will comply with all clearance requirements and applicable standards and regulations.
Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the cooktop. Locating the fixing brackets • • • The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the cooktop. Fix the cooktop on the work surface by screw four brackets on the bottom of cooktop (see picture) after installation.
A steam cleaner is not to be used. This ceramic can be connected only to a supply with system impedance no more than 0.427 ohm. In case necessary, please consult your supply authority for system impedance information.
- 29 -
This appliance is labeled in compliance with European directive 2012/19/EU for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way. The symbol on the product indicates that it may not be treated as normal household waste.
