Operation Manual

1. DESIGN FEATURES

■ 7-CHANNEL CAR AUDIO AMPLIFIER: This EMPHASER amplifier allows the amplification of

7-channel speaker system

■ FULL-MOSFET CIRCUITRY: This EMPHASER amplifier line features a full MOS-FET circuitry lay-

out, implementing MOS-FET’s for power supply and output stages, to guarantee excellent sonic per-

formance and very high power output.

■ 2 OHM LOAD STABILITY: This EMPHASER amplifier works stable and reliable into 2 ohms

impedance loads. Due to the high damping factor, full control over the connected speaker system(s) is

guaranteed

■ UNCOMPROMISING DESIGN AND CONSTRUCTION: Only best electrical and electronic

components have been used for the assembly of this amplifier line. Such as double-sided glass-fiber

epoxy circuit boards equipped with high current TR output devices. The power input side features mol-

ded direct power input terminals for full unrestricted current flow

■ ADVANCED PROTECTION CIRCUITRY: The protection circuitry safe-guards the amplifier from

short-circuits at the speaker outputs, DC offset voltage at the outputs and overheating of power elec-

tronics

■ STATUS AND PROTECTION LED’S: A green and a red LED located at the side panel enable

you to monitor the operating status of your EMPHASER amp

■ ADJUSTABLE INPUT SENSITIVITY: Each RCA line-input pair accepts input voltages from

300mV to 7V, providing a good match to the line-output levels of almost any head-unit on the market

EM 7-CH Manual 2003 03.06.2003 11:14 Uhr Seite 5