Specifications

8. TECHNICAL SPECIFICATIONS

EA4100-500 6-Channel Amplifier

Rated Power Output (RMS)

At 4 Ohms load / 13.8V (THD<=0.1%)

Channels 1/2-CH and 3/4-CH 82Wx4 all channels driven simultaneously

Channels 5/6-CH 225Wx2 all channels driven simultaneously

Rated Power Output (RMS)

At 4 Ohms load / 13.8V (THD<=1%)

Channels 1/2-CH and 3/4-CH 90Wx4 all channels driven simultaneously

Channels 5/6-CH 241Wx2 all channels driven simultaneously

Rated Power Output (RMS)

At 2 Ohms load / 13.8V (THD<=0.1%)

Channels 1/2-CH and 3/4-CH 135Wx4 all channels driven simultaneously

Channels 5/6-CH 313Wx2 all channels driven simultaneously

Rated Power Output (RMS)

At 2 Ohms load / 13.8V (THD<=1%)

Channels 1/2-CH and 3/4-CH 144Wx4 all channels driven simultaneously

Channels 5/6-CH 329Wx2 all channels driven simultaneously

Rated Power Output (RMS)

At 4 Ohms load / 13.8V (THD<=0.1%)

Channels 1/2-CH and 3/4-CH bridged 270Wx2 all channels driven simultaneously

Channels 5/6-CH bridged 620Wx1 all channels driven simultaneously

Damping Factor

All Channels stereo @ 4Ohms/100Hz > 200

Signal-to-Noise Ratio

(All channels) > 93 dB

Frequency Response

(all channels, frequency filtering

controls deactivated) 10Hz - 50 kHz (+0 dB / - 1 dB)

Channel Separation > 60 dB

(all channels)

Input Sensitivity

(all channels) 200 mV - 9.4V

Integrated Active Filtering

Slope Rates 12 dB /octave

Cross-Over Frequency

High Pass continuously variable 10 - 400 Hz

Low Pass continuously variable 40 - 400Hz

Fuse 2 x 80 A

Dimensions (W x H x D) 610 x 71 x 277 mm

EA 6-CH Manual 12.03.2002 13:32 Uhr Seite 30