Specifications

1. EA 4100-500 DESIGN FEATURES

■ 6-CHANNEL AMPLIFIER: The EA 4100-500 allows the cross-over controlled amplification of a

twin satellite/subwoofer or satellite / kickwoofer / subwoofer car audio system, without the need for

two or more amplifiers, and or an additional external active crossover

■ DASH-MOUNT REMOTE LOWPASS LEVEL CONTROL: The EA 4100-500 comes complete

with a compact remote "Lowpass-Level" control unit, which can be conveniently mounted on or under

the dashboard of your car. This control device allows the individual level adjustment of the volume level

(applicable for the lowpass operated channels 5/6 only)

■ TWO INDEPENDENT MOSFET POWER SUPPLIES: The EA4100-500 features independent

power supplies for "satellite" and subwoofer channels, to prevent unwanted interference between the

two amplifier sections

■ 1 OHM IMPEDANCE LOAD STABILITY: All channels of this amplifier are 1 ohm stable.

Furthermore, the output stage layout provides a very high damping factor and thus, the amplifier will

give you a very precise reproduction of any music material

■ INTEGRATED ELECTRONIC FREQUENCY FILTERING CONTROLS: All three crossover sec-

tions are totally independent and feature individually adjustable highpass, lowpass or bandpass filte-

ring, as well as fulllrange loop through. All internal active filters feature crossover slope rates of 12

dB/octave

■ UNCOMPROMISING DESIGN AND CONSTRUCTION: Only best electrical and electronic

components found their way into this amplifier, for example double-sided glass-fiber epoxy circuit

boards equipped with high current output devices. The power input side features molded 35mm

ter-

minals for full unrestricted current flow

■ ADVANCED PROTECTION CIRCUITRY: The protection circuitry safe-guards the amplifier from

short-circuits at the speaker outputs, DC offset voltage at the outputs and overheating of power elec-

tronics

■ STATUS AND PROTECTION LED'S: A green and a red LED enable you to easily monitor the

operating status of your EA4100-500 amplifier. The LED's are signaling normal operation and pro-

blems, such as short-circuits, electrical or thermal overload and DC voltage at the speaker outputs

■ ADJUSTABLE INPUT SENSITIVITY: Each RCA line-input pair accepts input voltages from

200mV to 9V, providing a good match to the line-output levels of almost any head-unit on the market

■ EXTERNAL FUSES: Maxi type fuses which that located at the power input side panel of the ampli-

fier, for fast and convenient exchange of blown fuses

■ INTERNAL FAN: This amplifier features advanced heat management by a temperature controlled

internal fan

EA 6-CH Manual 12.03.2002 13:31 Uhr Seite 5