Operation Manual

– 9 –– 8 –
Congratulations!
on your purchase of this sophisticated EMPHASER ECP26NEO-XT4 2-way component system. If you
plan on installing the ECP-XT4 component system by yourself, please read the following instructions
carefully before attempting the installation. If you have further questions about this product, please
contact your EMPHASER dealer.
teChnICal DeSIGn FeatUReS
MID/WOOFER ECP26NEO-XT4
■ 16.5 CM EURO-DIN ALUMINUM CAST BASKET
■ 5.6 OZ. NEODYMIUM MAGNET
■ WOVEN BLACK KEVLAR™ CONE
■ MBR BUTYL RUBBER DOUBLE-ROLL SURROUND
■ PROGRESSIVE BLACK NOMEX™ SPIDER
■ ALUMINUM PHASE-PLUG
■ 2-LAYER COPPER CLAD ALUMINUM WIRE VOICE COIL
■ 36 MM Ø POLYIMIDE VOICE COIL FORMER
■ VENTED CAVITY BELOW SPIDER
■ SCREW TERMINAL BINDING POSTS
■ INSULATED TINSEL LEAD WIRES
TWEETER ECP-XT4
■ 25 MM SOFT DOME TWEETER
■ COATED SILK DOME
■ CCAW WIRE VOICE COIL ON AL-FORMER
■ NdFeB NEODYMIUM MAGNET MOTOR
■ CAST ALUMINUM TWEETER HOUSING
■ FLAT- AND FLUSH MOUNTING ADAPTORS INCLUDED
■ LOW VISCOSITY FERROFLUID
CROSSOVER ECP26NEO-XT4
■ TWEETER ATTENUATION BY 4-POSITION JUMPER
■ GLASFIBER EPOXY CIRCUIT BOARD
■ MKP POLYPROPYLENE METAL-FILM CAPACITOR
■ LOW TOLERANCE METAL-OXIDE RESISTORS
■ LOW RESISTANCE AIR CORE INDUCTORS
■ OSRAM HPCCR LAMP TWEETER PROTECTION
ECP26NEO-XT4 Manual.indd 8 21.07.2006 13:00:40 Uhr