Operation Manual

– 9 –– 8 –
Congratulations!
on your purchase of this sophisticated EMPHASER ECP28NEO-XT4 2-way component system. If you
plan on installing the ECP-XT4 component system by yourself, please read the following instructions
carefully before attempting the installation. If you have further questions about this product, please
contact your EMPHASER dealer.
teChnICal DeSIGn FeatUReS
MID/WOOFER ECP28NEO-XT4
■ 8" ALUMINUM CAST BASKET
■ 7.6 OZ. NEODYMIUM MAGNET
■ CARBON FIBER CONE
■ NBR NITRILE RUBBER SURROUND
■ PROGRESSIVE BLACK CONEX™ SPIDER
■ 2-LAYER COPPER CLAD ALUMINUM WIRE VOICE COIL
■ 38 MM Ø POLYIMIDE VOICE COIL FORMER
■ VENTED CAVITY BELOW SPIDER
■ SCREW TERMINAL BINDING POSTS
■ INSULATED TINSEL LEAD WIRES
TWEETER ECP-XT4
■ 25 MM SOFT DOME TWEETER
■ COATED SILK DOME
■ CCAW WIRE VOICE COIL ON AL-FORMER
■ NdFeB NEODYMIUM MAGNET MOTOR
■ CAST ALUMINUM TWEETER HOUSING
■ FLAT- AND FLUSH MOUNTING ADAPTORS INCLUDED
■ LOW VISCOSITY FERROFLUID
CROSSOVER ECP28NEO-XT4
■ TWEETER ATTENUATION BY 4-POSITION JUMPER
■ GLASFIBER EPOXY CIRCUIT BOARD
■ MKP POLYPROPYLENE METAL-FILM CAPACITOR
■ LOW TOLERANCE METAL-OXIDE RESISTORS
■ LOW RESISTANCE AIR CORE INDUCTORS
■ OSRAM HPCCR LAMP TWEETER PROTECTION
ECP28NEO-XT4 Manual.indd 8 14.03.2007 17:39:29 Uhr