Owner`s manual
32925-3-0115Page 24
TO TURN OFF GAS TO FIREPLACE
1. STOP!Readthesafetyinformationabove.
2. Turn OFF electric power to the appliance.
3. Remove frontsurroundpanelassemblyor bottomlouverif
included.
4. Turngascockcounterclockwise
to “On” position.
5. Wait ten (10) minutes to clear out any gas. Then smell for gas,
includingneartheoor.Ifyousmellgas,STOP!Follow“B”in
thesafetyinformationaboveonthispage.Ifyoudonotsmell
gas, go to the next step.
6. Turn ON electric power to the appliance.
7. Findpilot-Followmetaltubefromgascontrol.Thepilotis
behindtheburnerontherightside.
8. Turnmain ame to on. If the pilot does not light within 60
seconds, stop and go to Step 5.
9. Refer to remote control instructions for detailed information,
control features, and operation. Note: There is a CPI/IP switch
behindtherightsidepanelthatallowsforacontinuousstanding
pilot mode or an intermittent pilot mode. See appliance manual
forlocationofthisswitch.Ifthepilotorburnerdoesnotstay
lit (in the standing pilot mode), stop and immediately call a
qualiedservicetechnicianorgassupplier.
10. Iftheburnerorpilotdoesnotoperateproperlyafterseveral
tries,turnthegascockclockwise to “OFF” and call
your service technician or gas supplier.
11. Replacethefrontsurroundassemblyorclosebottomlouver
assembly.
12. Operation of the gas valve is controlled by a manual on/
off switch or a hand held remote control. Refer to remote
instructions for detailed operation information.
FOR YOUR SAFETY READ BEFORE LIGHTING
WARNING:Ifyoudonotfollowtheseinstructionsexactly,areorexplosionmayresult
causing property damage, personal injury or loss of life.
A.Thisappliancehasapilotwhichmustbelightedbyhand.When
lighting the pilot, follow these instructions exactly.
B. Before lighting smell all around the appliance area for gas. Be
suretosmellnexttotheoorbecausesomegasisheavier
thanairandwillsettleontheoor.
What To Do If You Smell Gas
• Donottrytolightanyappliance.
• Donottouchanyelectricalswitch;
• Donotuseanyphoneinyourbuilding.
• Immediatelycallyourgassupplierfromaneighbor'sphone.
Follow the gas supplier's instructions.
• Ifyoucannotreachyourgassupplier,calltheredepart-
ment.
C.Useonlyyourhandtopushinorturnthegascontrolknob.
Neverusetools.Iftheknobwillnotpushinorturnbyhand,
don'ttrytorepairit;callaqualiedservicetechnician.Force
orattemptedrepairmayresultinareorexplosion.
D.Donotusethisapplianceifanyparthasbeenunderwater.
Immediatelycallaqualiedservicetechniciantoinspectthe
appliance and to replace any part of the control system and
anygascontrolwhichhasbeenunderwater.
LIGHTING INSTRUCTIONS
1. Set REMOTE/OFF/ON switch to OFF.
2. Turnoffallelectricpowertotheapplianceifserviceistobe
performed(ifapplicable).
3. Lowerbottomlouverassembly.
4. Pushingascontrolknobslightlyandturnclockwise
to"OFF."Donotforce.
5. Closebottomlouverassembly.
IP LIGHTING INSTRUCTIONS
OFF ON
PILOT
ELECTRODE
FLAME
SENSOR