Owner`s manual

32925-3-0115 Page 33
PROFLAME - IP CONTROL SYSTEM
Turn on the Appliance
Press the ON/OFF Button on the Transmitter. The Transmitter dis-
play will show all active Icons on the screen. At the same time
the Receiver connects the thermopile to the gas valve millivolt coil
andtheappliancemainburnerturnson.Asingle“beep”fromthe
Receiverwillconrmreceptionofthecommand.
Turn off the Appliance
Press the ON/OFF Button on the Transmitter. The Transmitter LCD
display will only show the room temperature and Icon (Figure 51).
At the same time the Receiver disconnects the thermopile from the
gasvalvemillivoltcoilandtheapplianceburnerturnsoff.Asingle
“beep”fromtheReceiverconrmsreceptionofthecommand.
Figure 51

TheProameGTMhassixamelevels.Withthesystemon,and
the ame level at the maximum in the appliance, pressing the
DownArrowButtononcewillreducetheameheightbyonestep
until the ame is turned off. The Up Arrow Button will increase
theameheighteachtimeitispressed.IftheUpArrowButtonis
pressedwhilethesystemisonbuttheameisoff,theamewill
come on in the high position (Figure 52 - 55).Asingle“beep”will
conrmreceptionofthecommand.
Figure 52
Figure 53
Figure 54
Figure 55