Owner`s manual

32925-3-0115Page 34
PROFLAME - IP CONTROL SYSTEM

The Remote Control can operate as a room thermostat. The ther-
mostatcanbesettoadesiredtemperaturetocontrolthecomfort
level in a room.
To activate this function, press the Thermostat Button (Figure 46).
The LCD display on the Transmitter will change to show that the
room thermostat is “ON” and the set temperature is now displayed
 To adjust the set temperature, press the
Up or Down Arrow Buttons until the desired set temperature is
displayed on the LCD screen of the Transmitter.
SET TEMPERATURE
ROOM TEMPERATURE
Figure 56a


TheSmartThermostatfunctionadjuststheameheightinaccor-
dancetothedifferencebetweenthesetpointtemperatureandthe
actual room temperatures. As the room temperature gets closer
tothesetpointtheSmartFunctionwillmodulatetheamedown.
To activate this function, press the Thermostat Button (Figure 46)
until the word "SMART"appears to the right of the temperature
bulbgraphic(Figure 57). To adjust the set temperature, press the
Up or Down arrow Buttons until the desired set point temperature
is displayed on the LCD screen of the Transmitter (Figure 58).
Figure 57
Figure 58