Owner`s manual

26591-1-1209Page 14

REAR VENT CONVERSION





off the rear vent, the following steps must be taken.

 



 





3. Install flue cover plate over the top flue opening with 4

screws.

4. Reinstall the inlet cover plate over the top inlet opening with 4

screws. See Figure 11.

 

 

screws.

7. This completes the conversion for a rear vent application.

SPECIAL VENT SYSTEMS



 

 

 

 

 

 

INLET VENT COLLAR

FLUE OUTLET COLLAR

INLET VENT

COVER PLATE

INLET VENT

COVER PLATE

FLUE COVER PLATE

(See note above.)

FLUE COVER PLATE

VERTICAL VENTING

HORIZONTAL VENTING

Note: It is recommended that the

flue cover plate tab be pulled

outward prior to removal.

This will ensure that the plate

is not accidentally dropped

inside the rear air chamber.

Figure 11