Owner`s manual
31449-4-1113 Page 7
Remote Control
Options & Accessories
Description
FRBC Millivolt/IP Battery Remote ON/OFF
FRBTC Millivolt/IP Battery Battery Remote T-Stat
FREC Electric Remote
FRBTP Millivolt/IP Programmable Remote
TMV Millivolt/IP WIRELESS Wall Thermostat
TRW Millivolt/IP REED SWITCH Wall Thermostat
FWS-1 Direct Ignition/Millivolt/IP Wall Switch
SPECIFICATIONS
DVX36 NAT DVX36 LP
Input Btu/hr Maximum 35,000 30,000
Btu/hr Minimum 24,500 21,000
KWH (Maximum) 10.3 8.8
(Minimum) 7.2 6.2
Orice #32 (P211) 1.65mm (P250)
Air Shutter Opening 1/4" (6.4mm) FULL OPEN
Height without standoff 34 3/4 (883mm) 34 3/4" (883mm)
Width 39 3/8" (1,000mm) 39 3/8" (1,000mm)
Depth 19 7/8" (505mm) 19 7/8" (505mm)
Gas Inlet Shutoff Valve (Pipe) 1/2 NPT 1/2 NPT
Venting Size 4 x 6 5/8 4 x 6 5/8
DVX42FP(3,7,9) NAT DVX42FP5 NAT DVX42FP(3,7,9) LP DVX42FP5 LP
Input Btu/hr Maximum 37,500 37,500 35,000 35,000
Btu/hr Minimum 26,000 26,000 28,000 28,000
KWH (Maximum) 11 11 10.3 10.3
(Minimum) 7.6 7.6 7.2 7.2
Orice #31 (P209) 2.75mm (P305) #50 (P245) 1.80mm (P304)
Air Shutter Opening 1/4" (6.4mm) 1/4" (6.4mm) FULL OPEN FULL OPEN
Height without standoff 34 3/4" (883mm) 34 3/4" (883mm) 34 3/4" (883mm) 34 3/4" (833mm)
Width 43 3/8" (1,101mm) 43 3/8" (1,101mm) 43 3/8" (1,101mm) 43 3/8" (1,101mm)
Depth 19 7/8" (505mm) 19 7/8" (505mm) 19 7/8" (505mm) 19 7/8" (505mm)
Gas Inlet Shutoff Valve (Pipe) 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT
Venting Size 5 x 8 5 x 8 5 x 8 5 x 8
NOTE: Air shutter settings are factory minimum settings. Some venting congurations may require minor air shutter adjustments for
optimum performance.
The following vent systems are acceptable for use with the
DVX42 series replaces:
Simpson Duravent® GS 5” - 8”
American Metal Products 5” - 8”
Selkirk Direct-Temp® 5” - 8”
Security Secure Vent® 5” - 8”
Excel DV Venting 5” - 8”
Empire Flexvent Kit DVVK-5F
SPECIAL VENT SYSTEMS
The following vent systems are acceptable for use with the
DVX36 series replaces:
Simpson Duravent® GS 4” - 6 ⅝”
American Metal Products 4” - 6 ⅝”
Selkirk Direct-Temp® 4” - 6 ⅝”
Security Secure Vent® 4” - 6 ⅝”
Excel DV Venting 4” - 6 ⅝”
Empire Horizontal Round Termination Kit DVVK-4RE
Note: DVA-47 not for use with Flex Vent Kits. For use with
Simpson Duravent vents only.